A short review on the role of alloying elements in duplex stainless steels
Y Han, ZH Liu, CB Wu, Y Zhao, GQ Zu, WW Zhu, X Ran - Tungsten, 2023 - Springer
Duplex stainless steels consisting of ferrite and austenite are widely used due to their
excellent mechanical properties and corrosion resistance. Compared with ferritic stainless …
excellent mechanical properties and corrosion resistance. Compared with ferritic stainless …
Texture, misorientation and mechanical anisotropy in a deformed dual phase stainless steel weld joint
The deformation behavior of a duplex stainless steel weld joint is studied. A detailed texture
analysis shows that the increase of the deformation percentage leads to a reinforcement of …
analysis shows that the increase of the deformation percentage leads to a reinforcement of …
Effects of deep cold rolling on the evolution of microstructure, microtexture, and mechanical properties of 2507 duplex stainless steel
M Chen, J He, M Wang, J Li, S Xing, K Gui… - Materials Science and …, 2022 - Elsevier
A commercial ferritic and austenitic duplex stainless steel was severely cold rolled at room
temperature from 50% to 87.5% thickness reduction. The microstructure and microtexture …
temperature from 50% to 87.5% thickness reduction. The microstructure and microtexture …
A multi-scale, multi-physics modeling framework to predict spatial variation of properties in additive-manufactured metals
The microstructure of additively manufactured (AM) metals has been shown to be
heterogeneous and spatially non-uniform when compared to conventionally manufactured …
heterogeneous and spatially non-uniform when compared to conventionally manufactured …
Effect of anisotropy and slip transfer on hydrogen-assisted cracking of a 2205 duplex stainless steel: a critical analysis
W Wu, H Fu, X Zhang, W Li, S Liu, J Li - Corrosion Science, 2023 - Elsevier
Abstract Duplex Stainless Steels (DSSs) for engineering applications usually show dual-
phase microstructure with directional phase distribution and considerable crystallographic …
phase microstructure with directional phase distribution and considerable crystallographic …
Effect of B2 morphology on the mechanical properties of B2-strengthened lightweight steels
G Park, CH Nam, A Zargaran, NJ Kim - Scripta Materialia, 2019 - Elsevier
Tensile properties and formability of B2-strengthened Fe-15Mn-10Al-0.8 C-5Ni and Fe-
16Mn-8Al-1C-5Ni lightweight steels have been investigated. Our results show that tensile …
16Mn-8Al-1C-5Ni lightweight steels have been investigated. Our results show that tensile …
Lean duplex TRIP steel: Role of ferrite in the texture development, plastic anisotropy, martensitic transformation kinetics, and stress partitioning
Constitutive micromechanical behavior of transformation induced plasticity (TRIP) stainless
steel (SS) alloys was investigated using high-energy synchrotron x-ray diffraction (S-XRD) …
steel (SS) alloys was investigated using high-energy synchrotron x-ray diffraction (S-XRD) …
Local characterization of austenite and ferrite phases in duplex stainless steel using MFM and nanoindentation
The local mechanical properties of ferritic and austenitic domains in a duplex stainless steel
are locally studied by nanoindentation. The elastic and plastic properties of the two phases …
are locally studied by nanoindentation. The elastic and plastic properties of the two phases …
Micromechanics and microstructure evolution during in situ uniaxial tensile loading of TRIP-assisted duplex stainless steels
Transformation-induced plasticity (TRIP) assisted duplex stainless steels, with three different
stabilities of the austenite phase, were investigated by synchrotron x-ray diffraction …
stabilities of the austenite phase, were investigated by synchrotron x-ray diffraction …
Load partitioning and strain-induced martensite formation during tensile loading of a metastable austenitic stainless steel
In-situ high-energy X-ray diffraction and material modeling are used to investigate the strain-
rate dependence of the strain-induced martensitic transformation and the stress partitioning …
rate dependence of the strain-induced martensitic transformation and the stress partitioning …