A review on the fatigue cracking of twin boundaries: Crystallographic orientation and stacking fault energy
Twin boundaries (TBs) are ubiquitous interfaces with specific structure in metallic materials.
They possess special interactions with dislocations and the fatigue cracking behaviors are …
They possess special interactions with dislocations and the fatigue cracking behaviors are …
Twinning-induced plasticity (TWIP) steels
BC De Cooman, Y Estrin, SK Kim - Acta Materialia, 2018 - Elsevier
This article reviews original work and important new developments in the field of
deformation behavior of high manganese face-centered cubic γ-Fe alloys. Owing to their …
deformation behavior of high manganese face-centered cubic γ-Fe alloys. Owing to their …
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
Laser-based powder-bed fusion additive manufacturing or three-dimensional printing
technology has gained tremendous attention due to its controllable, digital, and automated …
technology has gained tremendous attention due to its controllable, digital, and automated …
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
A significant increase in the research activity dedicated to high manganese TWIP steels has
occurred during the past five years, motivated by the breakthrough combination of strength …
occurred during the past five years, motivated by the breakthrough combination of strength …
[HTML][HTML] Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate
Metastable β titanium alloys with both twinning (TWIP) and martensite transformation (TRIP)
usually exhibit a low yield strength of between 200 and 500 MPa, but high strain hardening …
usually exhibit a low yield strength of between 200 and 500 MPa, but high strain hardening …
Crystallographic-orientation-dependent tensile behaviours of stainless steel 316L fabricated by laser powder bed fusion
In the present study, single-crystalline-like bulk stainless steel (SS316L) specimens with a
{110}< 001> Goss texture were produced by laser powder bed fusion (LPBF). The tensile …
{110}< 001> Goss texture were produced by laser powder bed fusion (LPBF). The tensile …
Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys
Equiatomic FeNiCoCrMn alloy has been reported to exhibit promising strength and ductility
at cryogenic temperature and deformation mediated by nano-twining appeared to be one of …
at cryogenic temperature and deformation mediated by nano-twining appeared to be one of …
The effect of grain size and grain orientation on deformation twinning in a Fe–22 wt.% Mn–0.6 wt.% C TWIP steel
I Gutierrez-Urrutia, S Zaefferer, D Raabe - Materials Science and …, 2010 - Elsevier
We investigate the effect of grain size and grain orientation on deformation twinning in a Fe–
22wt.% Mn–0.6 wt.% C TWIP steel using microstructure observations by electron channeling …
22wt.% Mn–0.6 wt.% C TWIP steel using microstructure observations by electron channeling …
Simultaneous improvement of strength and plasticity: Additional work-hardening from gradient microstructure
Enhancing strength-ductility synergy of materials has always been a hot but difficult topic in
material science, for most structural materials, steels in particular, it is inevitable to sacrifice …
material science, for most structural materials, steels in particular, it is inevitable to sacrifice …
Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions
The texture and microstructure evolutions of a fine-grained TWIP steel subjected to tensile
tests at room temperature were investigated in relation to the mechanical behavior. This …
tests at room temperature were investigated in relation to the mechanical behavior. This …