Dispersions of microfibrillated cellulose (MFC) in triethyl citrate have been considered as
biodegradable lubricants containing 1–7% MFC. Due to the presence of microfibril …

In this article, the mechanical properties and microstructure of 304L austenitic stainless
steel/Incoloy 800HT nickel alloy dissimilar welded joints are investigated. The joints were …

The paper investigates the cavitation erosion (CE) and sliding wear (SW) resistance of cold-
sprayed Al/Al2O3 and Cu/Al2O3 composites and studies them in relation to a set of metallic …

The high-strength low-alloy S460ML and S460N steels were chosen for underwater wet
welding of dissimilar T-joints using covered electrodes. For improving the quality of joints …

The study presents the effect of annealing process parameters on the microstructure,
hardness, and strain-hardening coefficients, that is, the strength coefficient c and the strain …

In this study, four protective coating materials: Inconel 718, Inconel 625, Alloy 33 and Stellite
6 were deposited on 16Mo3 steel tubes by means of CMT (Cold Metal Transfer), as an …

Surface modification is one of the most intensively studied issue of technology, which is
related to the almost all branches of industry. Since more than 100 years the huge number of …

The concept of Industry 4.0 is defined as a common term for technology and the concept of
new digital tools to optimize the manufacturing process. Within this framework of modular …

In this paper, the effects of different hydrophobic coatings on the surface of covered
electrodes on the quality of wet welded carbon steel joints were discussed. Commonly …

In this article, the results of research on the metal-mineral-type abrasive wear of a wear-
resistant plate made by a tubular electrode with a metallic core and an innovative chemical …