Strength properties of annealed austenitic stainless steels are relatively low and therefore
improvements are desired for constructional applications. The reversion of deformation …

A remarkable Lüders-type localized deformation having a huge Lüders strain of 0.4 was
observed in tensile deformation of an ultra-fine grained austenitic stainless steel fabricated …

The nano/ultrafine grain (NUG) with an average grain size of 230nm was obtained by cold
rolling down to 94% reduction in thickness and reversion annealing at 800° C for 200s. The …

The dry sliding friction and wear behavior of nano/ultrafine-grained (NG/UFG),
heterogeneous ultrafine-grained (HUFG), and coarse-grained (CG) austenitic stainless …

Ultrafine-grained austenitic stainless steels can be produced by the martensitic reversion
process, but the factors affecting the stability of refined austenite in subsequent deformation …

The microstructure and defect Characteristics in the surface layer of TC17 subjected to high
energy shot peening (HESP) were investigated detailedly, in which the particular attention …

This overview article discusses the Equal Channel Angular Pressing (ECAP) processing of
different metallic materials. Particular emphasis is given to the microstructural evolution from …

The effect of grain size and phase structure on fatigue behavior in Type 301LN austenitic
stainless steel was preliminarily investigated. Various grain sizes from submicron to coarse …

This research presents the microstructural and mechanical evolution throughout the welded
seam of an austenitic stainless steel (ASS) tube. It was found that the main hardness …

A novel processing route comprising double reversion annealing (DRA) was designed for
developing bulk nano-grained (NG) structure of an austenitic stainless steel (Type 301LN) …