Electrochemical and localized corrosion behavior of a 4045/7072/3003 M/4045 Al alloy
composite in 3.5 wt.% NaCl solution was investigated from cross-sectional and plane …

Stress corrosion cracking (SCC) behavior of 2024-T351 and 7075-T651 in solution and thin
electrolyte layer (TEL) are investigated by electrochemical and mechanical testing, surface …

The corrosion characteristics of passive films on 1060, 2024 and 5083 aluminum alloys
formed in citric acid solution are studied in Cl–-containing solutions by combining scanning …

The time dependent susceptibility of AA2198-T851 Al-Cu-Li alloy to severe localized
corrosion in 0.01 mol L− 1 NaCl solution has been investigated by immersion and SVET …

The corrosion inhibiting effect of lithium carbonate has been studied over the pH range
relevant for atmospheric corrosion conditions at the polymer/metal interface. It is …

The IGC behaviour, OCP and microstructure of AA1460 (Al-3.12 Cu-2.14 Li-0.12 Sc-0.12 Zr,
in wt.%), following HT1 (heat treatment without predeformation) and HT2 (heat treatment …

The effectiveness of strontium zinc phosphosilicate (SZP 391) as a corrosion inhibitor for the
protection of Al–Cu–Li alloy in 0.5 M NaCl solution was evaluated using electrochemical …

The effects of re-solution (RST) and re-aging (RA) treatment on the mechanical property,
microstructure, corrosion resistance and electrochemical behavior of 2196 Al-Cu-Li alloy …

Corrosion behaviour of 2A97-T6 Al-Cu-Li alloy was investigated by anodic polarization,
immersion test and quasi-in-situ analysis with corrosion morphology characterized by a …

In this study, a composite coating comprising a ceramic film and layered double hydroxide
(LDHs) layer was prepared on the surface of extruded 2195 Al–Li alloy. The preparation …