Recent progress in the development of diesel surrogate fuels
WJ Pitz, CJ Mueller - Progress in Energy and Combustion Science, 2011 - Elsevier
There has been much recent progress in the area of surrogate fuels for diesel. In the last few
years, experiments and modeling have been performed on higher molecular weight …
years, experiments and modeling have been performed on higher molecular weight …
[HTML][HTML] Impact of fuel molecular structure on auto-ignition behavior–Design rules for future high performance gasolines
At a first glance, ethanol, toluene and methyl tert-butyl ether look nothing alike with respect
to their molecular structures. Nevertheless, all share a similarly high octane number. A …
to their molecular structures. Nevertheless, all share a similarly high octane number. A …
Applications of quantitative laser sensors to kinetics, propulsion and practical energy systems
RK Hanson - Proceedings of the Combustion Institute, 2011 - Elsevier
Laser diagnostic techniques play a large and growing role in combustion research and
development. Here we highlight three areas where quantitative sensing based on laser …
development. Here we highlight three areas where quantitative sensing based on laser …
Shock tube ignition delay times and methane time-histories measurements during excess CO2 diluted oxy-methane combustion
The combustion of methane in air results in large amounts of CO 2 and NO X emissions. In
order to reduce the NO X emissions, one possible solution is the oxy-methane combustion …
order to reduce the NO X emissions, one possible solution is the oxy-methane combustion …
Experimental and kinetic modeling study on methylcyclohexane pyrolysis and combustion
Methylcyclohexane is the simplest alkylated cyclohexane, and has been broadly used as the
representative cycloalkane component in fuel surrogates. Understanding its combustion …
representative cycloalkane component in fuel surrogates. Understanding its combustion …
A review on Shock tubes with multitudinous applications
Shock tubes simulate jet aerodynamics and investigate the behavior of high-temperature
materials, which has significantly evolved since 1899. This article examines the changes in …
materials, which has significantly evolved since 1899. This article examines the changes in …
Experiments and modeling of the autoignition of methylcyclohexane at high pressure
New experimental data are collected for methyl-cyclohexane (MCH) autoignition in a heated
rapid compression machine (RCM). Three mixtures of MCH/O 2/N 2/Ar at equivalence ratios …
rapid compression machine (RCM). Three mixtures of MCH/O 2/N 2/Ar at equivalence ratios …
[HTML][HTML] The influence of ammonia on the laminar burning velocities of methylcyclohexane and toluene: An experimental and kinetic modeling study
Laminar burning velocities of methylcyclohexane and toluene blended with ammonia have
been determined using the heat flux method at atmospheric pressure and initial temperature …
been determined using the heat flux method at atmospheric pressure and initial temperature …
A comparative study of the oxidation characteristics of cyclohexane, methylcyclohexane, and n-butylcyclohexane at high temperatures
Ignition delay times were measured behind reflected shock waves for cyclohexane,
methylcyclohexane, and n-butylcyclohexane at 1.5 and 3atm, equivalence ratios near 1 and …
methylcyclohexane, and n-butylcyclohexane at 1.5 and 3atm, equivalence ratios near 1 and …
An experimental and modeling study of the propagation of cyclohexane and mono-alkylated cyclohexane flames
Laminar flame speeds of cyclohexane/air, methylcyclohexane/air, ethylcyclohexane/air, n-
propylcyclohexane/air, and n-butylcyclohexane/air mixtures were determined in the …
propylcyclohexane/air, and n-butylcyclohexane/air mixtures were determined in the …