In this study, NiO thin films are prepared on Ni foil using thermal evaporation method and the
effect of deposition conditions on structural, morphological and H 2 S gas sensing properties …

The catalytic activities of fullerene are affected largely by different shapes and surface
arrangements influencing catalyst activity and stability a lot. Surface structures of metal …

In this work, pure NiO and NiO: Cu based photodetectors with different concentrations of Cu
dopants (0, 0.5, 1.0, and 1.5 wt%) were coated on glass substrates by using a simple, low …

This work reports an impact of novel Terbium (Tb) doping on physical characteristics of NiO
nanostructured films. The doping concentrations of Tb varied from 0 to 5.0 wt% in NiO …

Ion beam modification is a one-of-a-kind approach for engineering nanomaterials to change
their chemical and physical properties. Ion beam engineering of metal oxide semiconductor …

Spinel ferrite samples of Mg 0.6 Zn 0.4 Fe 2 O 4 were fabricated using the sol-gel technique.
Thermal evaporation in the vacuum technique was used to deposit an (850, 350)±30 nm …

Nowadays the detection of unwanted volatile compounds in air is increasingly important in a
wide range of fields. Metal oxide nanosensors are extremely small and cheap devices that …

In this study, X-ZnO/ZnO/Si (100)(X= Co, Ni and Cu) bilayer structure is fabricated using low
energy ion implantation technique. Five different fluences 1× 10 15, 5× 10 15, 1× 10 16, 2.5× …

In this study, NiO nanoparticles (NPs) was prepared via solution combustion method using
nickel nitrate as an oxidizer, ethylenediaminetetraacetic acid as fuel at 450° C. The obtained …

In this study, we reported a systematic approach to prepare bare and lead doped Mn 3 O 4
films synthesized by the SILAR method. Morphological, structural, optical and dielectric …