Temperatures of hot section components in today's gas turbine engines reach as high as
1,500° C, making in situ monitoring of the severe temperature gradients within the engine …

The in situ strain/stress monitoring of hot components in harsh environments remains a
challenging task. In this study, TiB 2/SiCN thin-film strain gauges were fabricated on nickel …

Nanostructured multi-layer MgF 2/ITO coatings were deposited on glass substrate at various
substrate temperatures (25° C, 100° C, 250° C, 350° C) for electromagnetic interference …

Various ITO thin films were deposited by RF magnetron sputtering with different nitrogen
partial pressure (NPP) of 10%∼ 40% to quantitatively modify their high temperatures …

Thin film resistance strain gauges are being developed to monitor the in-situ static and
dynamic strain of engine blades in aerospace propulsion and power generation system. In …

This paper investigates the feasibility and performance of the fabrication of platinum high-
temperature thin-film strain sensors on nickel-based alloy substrates by additive …

Two-step mixed atmosphere annealing was developed to enhance the stability of the
nitrogen-doped ITO (ITON) thin films at high temperatures. The ITON thin films were first …

A reflective-type display device based on phase change materials is attractive because of its
ultrafast response time and high resolution compared with a conventional display device …

Indium oxide (In2O3) and indium tin oxide (ITO) thin films have been investigated for high
temperature thermocouple and strain guage applications. Reactive sputtering in nitrogen …

Designing high-temperature strain gauges based on in situ strain monitoring is critical for hot-
end component health monitoring. However, most current thin or thick film strain gauges …