This review addresses a comparison, based on the literature, among nitrile rubber (NBR),
ethylene-propylene-diene-monomer rubber (EPDM), and polyurethane (PU) elastomeric …

In this study, the effect of bismuth (III) oxide addition on the mechanical, thermal, rheological
and gamma ray attenuation capability of EPDM rubber was extensively investigated. In this …

EPDM rubber gaskets, as a water-proof sealing material installed in the tunnel segment
joints, were subjected to compressive stress-thermo oxidative ageing at different …

In this study, EPDM and boron trioxide composite was produced and mechanical, thermal
and neutron shielding tests were performed. EPDM rubber (Ethylene Propylene Diene …

Diamond-like carbon (DLC) films are deposited on rubber surfaces to protect the rubber
components, and surface pretreatment of the rubber substrates prior to the film deposition …

The inert surface of Ground Tire Rubber (GTR) particles results in its weak compatibility with
asphalt matrix and thus causes serious phase separation in rubberised asphalt. Meanwhile …

Boron and boron-based materials are highly effective for thermal neutron shielding and a
material with high hydrogen content is a good choice for neutron shielding. Hexagonal …

Based on Zn 2+-carboxyl coordination strategy, EPDM-g-Glu/ZDMA composite was
prepared by grafting of maleic anhydride (MAH)/glutamic acid (Glu) onto EPDM chains via …

Among the numerous novel eco-friendly insulating gases, C4F7N has attracted much
attention due to its excellent electrical performance. However, except for the electrical …

C4F7N (fluorinated nitrile) has been introduced as a remarkable substitute gas for the
greenhouse gas SF6 (sulfur hexafluoride) which is used in gas-insulated equipment (GIE) …