In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of
AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of …

The structure and mechanical properties of boronized layers produced on low carbon steel
substrates by non-vacuum electron-beam cladding were studied. This process provides high …

The implementation of post-treatments for the enhancement of the mechanical behavior of
boride layers has been conducted in recent years. For this reason, the borided 8% Cr steel …

The role of surface mechanical attrition treatment (SMAT) on pack boronizing of AISI H11
type tool steel is addressed. SMAT induced plastic deformation, enabled nanocrystallization …

Low alloy steel was pack-borided at different processing temperatures (at 850, 950, and
1050° C) and times (2, 4, and 6 h). The microstructural characterisation of boronized steel …

The Royalloy steel was boronized at 1173, 1223, 1248, 1273 or 1323 K for 1, 3, 5, 7 or 10 h
using a Durborid powder mixture. The boronized samples were analyzed by scanning …

Powder-pack boriding process was conducted on AISI D2 tool steel to improve its solid
particle erosion resistance when compared to hardened and tempered (H&T) AISI D2 steel …

This study was carried out to investigate the fracture toughness of boride layers in ductile
irons using a Vickers indentation method and to demonstrate the method's reliability. For this …

This paper presents the results of a study on high-speed non-vacuum electron-beam
cladding of boron powders on low-carbon steel. We studied one-, two-and three-layer boride …

D2 is an air-hardening tool steel and due to its high chromium content provides very good
protection against wear and oxidation, especially at elevated temperatures. Boriding of D2 …