Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility
We show that interstitial nitrogen doping improves the tensile properties of a CoCrNi alloy. A
material with 0.5 at% interstitial nitrogen was compared to a nitrogen-free CoCrNi alloy. The …
material with 0.5 at% interstitial nitrogen was compared to a nitrogen-free CoCrNi alloy. The …
Effect of heat-treatment temperature on microstructures and mechanical properties of Co–Cr–Mo alloys fabricated by selective laser melting
Y Kajima, A Takaichi, N Kittikundecha… - Materials Science and …, 2018 - Elsevier
Selective laser melting (SLM) has attracted considerable attention as an advanced method
for the fabrication of biomedical devices. However, SLM-manufactured parts easily …
for the fabrication of biomedical devices. However, SLM-manufactured parts easily …
Investigation on the microstructure, mechanical property and corrosion behavior of the selective laser melted CoCrW alloy for dental application
Y Lu, S Wu, Y Gan, J Li, C Zhao, D Zhuo… - Materials Science and …, 2015 - Elsevier
In this study, an experimental investigation on fabricating Ni-free CoCrW alloys by selective
laser melting (SLM) for dental application was conducted in terms of microstructure …
laser melting (SLM) for dental application was conducted in terms of microstructure …
Synthesis of titanium oxide nanotubes loaded with hydroxyapatite
A simple method of synthesis of TiO2 nanotubes (TiNT) loaded with hydroxyapatite (HAP) is
described. Such nanotubes find wide applications in various fields, including biomedicine …
described. Such nanotubes find wide applications in various fields, including biomedicine …
[HTML][HTML] Study on the effect of preheating temperature of SLM process on characteristics of CoCrMo alloy
GB Bang, JH Park, WR Kim, SK Hyun, HK Park… - Materials Science and …, 2022 - Elsevier
This is a study on the effects of the pre-heating temperature of the selective laser melting
(SLM) process on the microstructure and mechanical characteristics of CoCrMo alloy …
(SLM) process on the microstructure and mechanical characteristics of CoCrMo alloy …
Enhancing the mechanical property of laser powder bed fusion CoCrMo alloy by tailoring the microstructure and phase constituent
Y Zhang, W Lin, Z Zhai, Y Wu, R Yang… - Materials Science and …, 2023 - Elsevier
Cellular structure with a high density of dislocations and elemental segregation at the cell
boundaries is the characteristic microstructure of the laser powder bed fusion (LPBF) …
boundaries is the characteristic microstructure of the laser powder bed fusion (LPBF) …
Effect of processing parameters on the microstructure and mechanical properties of Co–Cr–Mo alloy fabricated by selective laser melting
B AlMangour, M Luqman, D Grzesiak, H Al-Harbi… - Materials Science and …, 2020 - Elsevier
Selective laser melting (SLM) is an additive manufacturing process that builds metal
components according to computer-aided design (CAD), selectively fusing and …
components according to computer-aided design (CAD), selectively fusing and …
A new antibacterial Co-Cr-Mo-Cu alloy: Preparation, biocorrosion, mechanical and antibacterial property
E Zhang, C Liu - Materials Science and Engineering: C, 2016 - Elsevier
Abstract Co-Cr-Mo alloys have been widely used in hip implants due to their good anti-
corrosion and good wear resistance. However, complaint is still raising due to infection and …
corrosion and good wear resistance. However, complaint is still raising due to infection and …
[HTML][HTML] Unraveling the role of sintering temperature on physical, structural and tribological characteristics of ball milled Co28Cr6Mo biomaterial based alloy
This work aim to investigate the effect of sintering temperature (950–1250° C) on structural,
physical, tribological properties of nanobiomaterial Co28Cr6Mo alloy for total hip prosthesis …
physical, tribological properties of nanobiomaterial Co28Cr6Mo alloy for total hip prosthesis …
Development of new Co–Cr–W-based biomedical alloys: effects of microalloying and thermomechanical processing on microstructures and mechanical properties
K Yamanaka, M Mori, K Kuramoto, A Chiba - Materials & Design, 2014 - Elsevier
The application of computer-aided design and computer-aided manufacturing (CAD/CAM) to
dentistry has recently attracted considerable attention as a new technique for designing and …
dentistry has recently attracted considerable attention as a new technique for designing and …