Deposition of coatings on the surface of a bulk material is a versatile, economical, and
effective strategy to provide additional features to the bulk material, mainly to improve its …

In this research, cold sprayed Al coating layer on AZ31B Mg alloy was coated with cold
sprayed Ti and Ta/Ti coatings, which noticeably reduced the wear rate of Al coated Mg alloy …

Nitrogen processed, cold sprayed commercially pure (CP)-Al coatings on Mg-based alloys
mostly lack acceptable hardness, wear resistance and most importantly are highly …

Cold spray has the potential to restore damaged aerospace components made from titanium
alloy, Ti6Al4V at low temperature (200-400° C). Traverse scanning speed during deposition …

Metal-matrix composite (MMC) coatings are advanced materials, composed of two or more
phases that can be tailored based on the industrial needs such as lightweight and wear …

In this study, WC p/Ti composite coatings with the WC proportions of 30.1–44.1 vol% were
cold sprayed using powders with WC proportions of 40–80 vol%. Coatings are well bonded …

In this study, CoCrMo and Ti6Al4V coatings were deposited on 6061-T651 aluminum alloy
substrates via a high pressure cold spray process. Adhesion, tribological and corrosion …

Compared to thermal spraying, the cold spray (CS) process features virtually oxide-free
coatings without thermal defects and residual stress, and it is suitable for processing Ti and …

Ti6Al4V coatings were deposited on Ti6Al4V substrates by using a high pressure cold spray
system. Before deposition, the substrate surfaces were prepared with four different surface …

In this study, the wear and corrosion resistances of cold sprayed Ti-6Al-4V (Ti64) coatings
on commercial Ti64 substrates using nitrogen (N 2) and helium (He) working gases were …