High-temperature resistant material is becoming increasingly significant in numerous
industrial applications, including aerospace and automotive use, to increase fuel efficiency …

Aluminum matrix composites (AMCs) reinforced with the nano‐sized particles are very
important materials for the applications in industrial fields. These aluminum matrix …

A great challenge in producing TiC reinforced metal matrix composites is encountered to
directly add TiC particles into molten steel during casting owing to floating of nano-sized TiC …

Abstract In the present work, 0.6 wt% graphene nanoplatelets reinforced 6061Al
(GNPs/6061Al) composite was prepared by pressure infiltration process and hot extruded …

Abstract The Al-4.5 Cu alloy reinforced by submicron-sized TiC particles (TiC p) was
fabricated by initially in-situ synthesizing Al–5TiC master alloy, and then incorporating …

Microstructure inhomogeneity and through-thickness creep properties of friction stir welding
(FSW) 7B50-T7451 aluminum alloy thick plate joint were investigated. The results show that …

The influence of microalloying with Mg (0–0.36 wt%) on the elevated-temperature strength
and creep resistance of Al–Cu 224 cast alloys was investigated. The Mg-containing alloys …

Abstract Nanosized TiC and TiB 2 particles (TiC p, TiB 2p) can increase the mechanical
properties of Al alloys. However, their effects on the corrosion performance of Al alloys are …

The effects of individual and combined additions of transition elements (TEs) Zr, Ti, and V on
the microstructure evolution and elevated-temperature mechanical and creep properties of …

In this work, creep behaviors of two Al–Cu–Mn alloys (Alloy-A: Al-1.7 wt% Cu-0.3 wt% Mn,
Alloy-B: Al-2.2 wt% Cu-0.8 wt% Mn) were investigated at temperature 448 K–523 K under …