Experimental Demonstration of CeO2-Based Tunable Gated Memristor for RRAM Applications

S Saha, S Pal, S Roy, P Sahatiya… - ACS Applied Electronic …, 2023 - ACS Publications
This paper reports the fabrication and characterization of a cerium dioxide (CeO2)-based
gated memristor with metal electrodes. The fabricated device exhibits memristive behavior …

HPR-Mul: An Area and Energy-Efficient High-Precision Redundancy Multiplier by Approximate Computing

J Vafaei, O Akbari - IEEE Transactions on Very Large Scale …, 2024 - ieeexplore.ieee.org
For critical applications that require a higher level of reliability, the triple modular
redundancy (TMR) scheme is usually employed to implement fault-tolerant arithmetic units …

Highly-reliable approximate quadruple modular redundancy with approximation-aware voting

M Masadeh, A Aoun, O Hasan… - 2020 32nd International …, 2020 - ieeexplore.ieee.org
Redundancy has been a general method to produce a fault-tolerance system. The Triple
Modular Redundancy (TMR) with majority voters covers 100% single fault-masking, where …

Improving selective fault tolerance in gpu register files by relaxing application accuracy

MM Goncalves, IP Lamb, P Rech… - … on Nuclear Science, 2020 - ieeexplore.ieee.org
The high computing power of graphics processing units (GPUs) makes them attractive for
safety-critical applications, where reliability is a major concern. This article uses an …

A low-cost fault tolerance method for arm and risc-v microprocessor-based systems using temporal redundancy and approximate computing through simplified …

A Aponte-Moreno, F Restrepo-Calle… - Journal of Integrated …, 2021 - jics.org.br
Approximate Computing techniques have been successfully used to reduce the overhead
associated with redundancy in fault-tolerant system designs. This paper presents a fault …

Using approximate computing and selective hardening for the reduction of overheads in the design of radiation-induced fault-tolerant systems

A Aponte-Moreno, F Restrepo-Calle, C Pedraza - Electronics, 2019 - mdpi.com
Fault mitigation techniques based on pure software, known as software-implemented
hardware fault tolerance (SIHFT), are very attractive for use in COTS (commercial off-the …

PB-IFMC: A selective soft error protection method based on instruction fault masking capability

A Mokhtarpour, AMH Monazzah… - 2020 25th International …, 2020 - ieeexplore.ieee.org
Reliability is an important concern in safety-critical applications. Hardware and software
redundancies are used to include reliability in such systems. Software approaches benefit …

Approximate computing: Towards ultra-low-power systems design

KS Mohamed, KS Mohamed - Neuromorphic Computing and Beyond …, 2020 - Springer
Power consumption has emerged to be a major design constraint for modern integrated
circuits, especially for low power applications such as the “Internet of Things,” wearable, and …

A Low-Overhead Radiation Hardening Approach using Approximate Computing and Selective Fault Tolerance Techniques at the Software Level

A Aponte-Moreno, F Restrepo-Calle… - 2019 19th European …, 2019 - ieeexplore.ieee.org
A Low-Overhead Radiation Hardening Approach using Approximate Computing and
Selective Fault Tolerance Techniques at the Software Page 1 A Low-Overhead Radiation …

Design of Fault Tolerant Embedded Systems using Approximate Computing Techniques.

JA Aponte Moreno - repositorio.unal.edu.co
Due to technological scaling, the susceptibility of modern systems to radiation effects has
been steadily increasing. Consequently, it has become essential to protect systems against …