Using nanoadditives in lubricants is one of the most effective ways to control friction and
wear, which is of great significance for energy conservation, emission reduction, and …

Nanoparticles acting as additives to improve the tribological performance of base fluids have
attracted much attention in the last several decades to lower wear loss, reduce the frictional …

A nanofluid minimum quantity lubrication with addition of one kind of nanoparticle has
several limitations, such as grinding of difficult-to-cutting materials. Hybrid nanoparticles …

In consideration of the combined present research situation of vegetable oil as minimum
quantity lubrication (MQL) base oil domestically and abroad, the lubricating property of …

The effect of nanoparticle concentration on the lubricating property of nanofluids for
minimum quantity lubrication (MQL) grinding was experimentally investigated based on the …

The effects of the base lubricant with and without nanoparticles on the tribological behavior
of magnesium alloy/steel contacts were investigated using a reciprocating sliding ball-on-flat …

Due to the increasing demand of low emission and fuel economy, friction modifiers have
been widely used in lubricating compositions to adjust friction and wear properties of …

In the present paper, the rheological and tribological measurements of the SAE 5W30 multi-
grade engine oil as a base lubricant and a novel ternary combination of molybdenum …

Graphene is a two-dimensional nanomaterial with a monolayer of atomic thickness. Due to
its high specific surface area, weak interlayer interaction and good chemical stability …

Recently, we have proposed an Electro-hydrostatic-actuator (EHA) based on a novel linear
oscillating motor, which permits nanoparticle additives, such as layered graphene and MoS …