Cold roll bonding (CRB), a well established and widely used manufacturing process, is a
solid state bonding process to join similar and dissimilar metals. The present work offers a …

Accumulative roll-bonding (ARB) process is a severe plastic deformation process capable of
developing grains below 1μm in diameter and to improve mechanical properties. In this …

In this study, commercial purity aluminum (AA1100) strips were cold roll bonded at ambient
temperature. As the main factors, the effects of different amounts of reduction in thickness …

Abstract Al 6061/Ti–6Al–4V/Al 6061 laminated composites were fabricated by hot-roll
bonding. The effect of rolling temperature and reduction on the microstructure and …

Cu-Al bimetallic composite plates with a thickness of 2 mm were prepared by a horizontal
continuous composite casting-rolling process. The effects of rolling parameters on the …

In this study, 7075 Al/AZ31B Mg/7075 Al laminated composites were prepared by hot roll
bonding method. Microstructure and bonding strength of the experimental laminated …

Layered materials have become an increasingly interesting topic in industrial development.
Cold roll bonding (CRB) process, as a solid phase method of bonding same or different …

In this article, the influences of ultrasonic vibrations and post-annealing on the formability of
multilayered Al5052/MgAZ31B composite were evaluated experimentally. Accordingly, a …

From a study of interfacial behavior at deformations up to 60%, a mechanism is proposed for
pressure welding of aluminum strips by rolling at warm and cold conditions, where faying …

Abstract Tri-layered Al/brass/Al composite was fabricated by cold roll bonding (CRB). The
bond strength, threshold deformation and peeled off surface were examined and compared …