Challenges and status of ITER conductor production
A Devred, I Backbier, D Bessette… - Superconductor …, 2014 - iopscience.iop.org
Taking the relay of the large Hadron collider (LHC) at CERN, ITER has become the largest
project in applied superconductivity. In addition to its technical complexity, ITER is also a …
project in applied superconductivity. In addition to its technical complexity, ITER is also a …
JackPot: a novel model to study the influence of current non-uniformity and cabling patterns in cable-in-conduit conductors
EPA Van Lanen, A Nijhuis - Cryogenics, 2010 - Elsevier
JackPot is a new model that is used to analyse how and to what extend current non-
uniformity among strands in a cable-in-conduit conductor (CICC) affects its performance …
uniformity among strands in a cable-in-conduit conductor (CICC) affects its performance …
Methods, accuracy and reliability of ITER conductor tests in SULTAN
P Bruzzone, B Stepanov, R Wesche… - IEEE transactions on …, 2009 - ieeexplore.ieee.org
In the last decade, a large number of high current, force flow superconductors have been
tested as short length samples in the SULTAN facility. The object of the test ranged over …
tested as short length samples in the SULTAN facility. The object of the test ranged over …
Electromagnetic modeling of the jacket in cable-in-conduit conductors
M Breschi, PL Ribani - IEEE transactions on applied …, 2008 - ieeexplore.ieee.org
Most magnets designed for thermonuclear fusion experiments rely on the cable-in-conduit
conductor technology. These cables are made of several hundreds or thousands of …
conductor technology. These cables are made of several hundreds or thousands of …
30 years of conductors for fusion: A summary and perspectives
P Bruzzone - IEEE transactions on applied superconductivity, 2006 - ieeexplore.ieee.org
Three decades of conductor R&D, prototypes, model coils and actual fusion devices are
reviewed with special attention to the drivers of the design. The conductor options are …
reviewed with special attention to the drivers of the design. The conductor options are …
THELMA code electromagnetic model of ITER superconducting cables and application to the ENEA stability experiment
The new THELMA code, including a thermal-hydraulic (TH) and an electro-magnetic (EM)
model of a cable-in-conduit conductor (CICC), has been developed. The TH model is at this …
model of a cable-in-conduit conductor (CICC), has been developed. The TH model is at this …
Test results from the PF conductor insert coil and implications for the ITER PF system
D Bessette, L Bottura, A Devred… - IEEE transactions on …, 2009 - ieeexplore.ieee.org
In this paper we report the main test results obtained on the Poloidal Field Conductor Insert
coil (PFI) for the International Thermonuclear Experimental Reactor (ITER), built jointly by …
coil (PFI) for the International Thermonuclear Experimental Reactor (ITER), built jointly by …
Contact resistance, coupling and hysteresis loss measurements of ITER poloidal field joint in parallel applied magnetic field
J Huang, Y Ilyin, WAJ Wessel… - Superconductor …, 2022 - iopscience.iop.org
The inter-strand contact resistance and AC losses were measured on an International
Thermonuclear Experimental Reactor (ITER) poloidal field (PF) coil joint in a parallel applied …
Thermonuclear Experimental Reactor (ITER) poloidal field (PF) coil joint in a parallel applied …
Design and optimization of the 12.5 T EFDA dipole magnet
The aim of this paper is to provide an overview of a recent study carried out—within the
framework of the European Fusion Program—to design a 12.5 T superconducting dipole. By …
framework of the European Fusion Program—to design a 12.5 T superconducting dipole. By …
Quench propagation in a TF coil of the EU DEMO
The design of a suitable quench protection system is fundamental for the safe operation of
superconducting magnets and in turn requires the accurate simulation of the quench …
superconducting magnets and in turn requires the accurate simulation of the quench …