Abstract Equiatomic TiZr (Hf, Ta, Nb) medium entropy alloys (MEAs) were developed to
achieve higher corrosion resistance than pure Ti. Nb and Ta alloying can greatly improve …

In this manuscript the tribocorrosive behavior of two common biomaterials adopted in
dentistry such as Titanium Grade V and Steel 316 L was investigated by a tribometer …

As a destructive phenomenon with possible detrimental impact especially when it comes to
human life, tribocorrosion has always been imperative to be researched. Hence, various …

The tribocorrosion behaviour of Ti-6Al-4 V exposed to phosphate buffered saline was
investigated under a range of normal forces in both cathodic and anodic regions to provide a …

TiB 2 and TiB double layers were formed on surface of Ti-6Al-4V by a diffusional process at
850 ͦ C for 4–16 h. EIS and XPS analyses revealed that formation of a passive film on the …

Tribocorrosion is a recent paradigm of tribology defined as the combination of simultaneous
mechanical and chemical wear of couplings. To date, this phenomenon is common in …

TiB 2+ TiB coatings were formed on Ti–6Al–4V through a molten-salt diffusional process at
temperatures of 850° C and 900° C for 16 h. The thickness of the TiB layer increased by …

This study uses an experimental approach to investigate the relationship between metal-on-
metal and ceramic/metal tribocorrosive behaviours. A set of tribocorrosion experiments were …

Tribocorrosion of titanium alloys improves by thermal oxidation which results in formation of
an oxygen diffusion layer (ODL). However, the formation of ODL decreases the …

An oxygen diffusion layer (ODL) was produced on a commercially pure titanium (CP-Ti)
using atmospheric thermal oxidation at a temperature of 850° C for 36 h. The ODL was then …