Recent research and development status of laser cladding: A review

L Zhu, P Xue, Q Lan, G Meng, Y Ren, Z Yang… - Optics & Laser …, 2021 - Elsevier
In industries such as aerospace, petrochemistry and automobile, many parts of different
machines are under environment which shows high temperature and high pressure, and …

Effect of laser surface remelting on Microstructure, mechanical properties and tribological properties of metals and alloys: A review

SMA Bukhari, N Husnain, FA Siddiqui, MT Anwar… - Optics & Laser …, 2023 - Elsevier
Surface defects like porosity, cracks, coarse grains, surface roughness, etc. have a huge
impact on the strength and performance of materials. Due to this, surface treatments have …

Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting

W Yu, SL Sing, CK Chua, X Tian - Journal of Alloys and Compounds, 2019 - Elsevier
Re-melting strategies with same and opposite directions to the first scanning routine were
performed in AlSi10Mg parts by selective laser melting (SLM) technology. Surface …

Wear mechanisms and micro-evaluation on WC particles investigation of WC-Fe composite coatings fabricated by laser cladding

Q Xiao, W lei Sun, K xin Yang, X feng Xing… - Surface and Coatings …, 2021 - Elsevier
With WC as the reinforcing phase particles, the Fe-WC composite coatings with mass
fractions 0–60 wt% of WC were fabricated on a 15CrNiMo cone bit steel by laser cladding …

Corrosion-resistant high-entropy alloy coatings: a review

H Cheng, Z Pan, Y Fu, X Wang, Y Wei… - Journal of The …, 2021 - iopscience.iop.org
For a long time, the corrosion problem of materials has been an essential factor in restricting
high-tech and national economic development. As an effective means of corrosion …

A review on high entropy alloys coatings: fabrication processes and property assessment

J Li, Y Huang, X Meng, Y Xie - Advanced Engineering Materials, 2019 - Wiley Online Library
Surface coatings can enhance the mechanical and functional properties of substrates and
keep good balance between specific mechanical properties and sufficient surface …

Laser cladding process of Fe/WC metal matrix composite coatings on low carbon steel using Yb: YAG disk laser

D Bartkowski, A Bartkowska, P Jurči - Optics & Laser Technology, 2021 - Elsevier
The paper presents the studies of selected properties of Fe/WC metal matrix composite
coatings produced using different laser beam power values and different powder feeding …

Effect of WC mass fraction on the microstructure and friction properties of WC/Ni60 laser cladding layer of brake discs

W Li, X Yang, J Xiao, Q Hou - Ceramics International, 2021 - Elsevier
Laser cladding Ni-based composite coating has significant advantages in improving the
surface properties of QT500-7. WC/Ni60 composite powders with different WC mass …

Influence of laser remelting on organization, mechanical properties and corrosion resistance of Fe-based amorphous composite coating

H Wang, Y Cheng, J Yang, Q Wang - Surface and Coatings Technology, 2021 - Elsevier
Laser cladding and laser remelting methods were adopted to prepare Fe-based amorphous
coating on H13 steel surface. And the organization and properties after laser cladding and …

Microstructure and properties of IN718/WC-12Co composite coating by laser cladding

P Xu, L Zhu, P Xue, Z Yang, S Wang, J Ning… - Ceramics …, 2022 - Elsevier
To improve microhardness and tribological properties of IN718, WC-12Co particles were
added to it by the laser cladding. This study investigated the effect of the content of WC …