Effect of friction coefficient in deep drawing of AA6111 sheet at elevated temperatures
B WANG, FU Lei, Z Jing, M HUANG - Transactions of Nonferrous Metals …, 2015 - Elsevier
The effect of friction coefficient on the deep drawing of aluminum alloy AA6111 at elevated
temperatures was analyzed based on the three conditions using the finite element analysis …
temperatures was analyzed based on the three conditions using the finite element analysis …
Microstructure and corrosion resistance of Al5083 alloy hybrid plasma-MIG welds
D Cai, S Han, S Zheng, Z Luo, Y Zhang… - Journal of Materials …, 2018 - Elsevier
The Al5083 alloy was welded by plasma-MIG hybrid welding with optimized parameters of
58A MIG current and 130 A plasma current with speed of 4.75 mm/s. Good appearance with …
58A MIG current and 130 A plasma current with speed of 4.75 mm/s. Good appearance with …
Influence of process parameters on deep drawing of AA6111 aluminum alloy at elevated temperatures
W Ma, B Wang, lei Fu, J Zhou, M Huang - Journal of Central South …, 2015 - Springer
To gain a deep insight into the hot drawing process of aluminum alloy sheet, simulations of
cylindrical cup drawing at elevated temperatures were carried out with experimental …
cylindrical cup drawing at elevated temperatures were carried out with experimental …
Deformation behavior and microstructure evolution in thermal-aided mesoforming of titanium dental abutment
With the increasing demand for meso/micro-scaled medical products made of biocompatible
materials, thermal-aided mesoforming is proposed to improve material formability and …
materials, thermal-aided mesoforming is proposed to improve material formability and …
Theoretical analysis of minimum metal foil thickness achievable by asymmetric rolling with fixed identical roll diameters
LIU Xin, X Liu, S Meng, X Sun, L Liu - … of Nonferrous Metals Society of China, 2016 - Elsevier
A novel approach is proposed for computing the minimum thickness of a metal foil that can
be achieved by asymmetric rolling using rolls with identical diameter. This approach is …
be achieved by asymmetric rolling using rolls with identical diameter. This approach is …
Aluminum dome structures' stability study
V Tonkacheiev, S Bilyk… - Strength of Materials and …, 2024 - omtc.knuba.edu.ua
The large spans dome structures made of aluminum alloys work is considered. The dome
elements material choice is due to the lower weight compared to steel elements, the material …
elements material choice is due to the lower weight compared to steel elements, the material …
Reverse deep drawability of 5A06 aluminum alloy plate at elevated temperatures
Z Zhang, Y Xu, S Yuan - Transactions of Nonferrous Metals Society of …, 2016 - Elsevier
In order to avoid the occurrence of fracture at room temperature in reverse deep drawing of
aluminum alloy plate, the warm reverse deep drawing method was proposed. The …
aluminum alloy plate, the warm reverse deep drawing method was proposed. The …
超声波振动条件下磁控溅射纳米材料的超塑变形研究
蒋少松, 卢振, 张凯锋 - 精密成形工程, 2015 - jmcx.ijournals.cn
根据高性能纳米材料高精度成形的发展需求, 介绍了磁控溅射纳米材料的组织及力学特性,
分析了磁控溅射纳米材料超塑成形的优缺点, 描述了大功率超声波振动对超塑成形的促进作用 …
分析了磁控溅射纳米材料超塑成形的优缺点, 描述了大功率超声波振动对超塑成形的促进作用 …