In the present article, fatigue properties (pure and fretting) of magnesium alloys (AM60)
under cyclic bending loading were compared. For this objective, a rotary fatigue testing …

This article has studied the corrosion fretting fatigue (CFF) properties of piston aluminum
alloy. In addition, the impact of heat treatment and the nano-clay reinforcement on the CFF …

The current study examined the plain fatigue and the fretting fatigue behaviors of the piston
pin alloy (16MnCr5 steel) under fully-reversed rotating bending loading. The standard …

The presence of cyclic loading alongside the wear increases the probability of fretting
fatigue phenomenon in the cylinder head of automobiles. In the current study, the nano …

Contemporarily, aluminum alloy is widely used in automobile industries, especially in
engine parts, due to the properties of mentioned alloy like low weight ratio and proper …

In the present article, a microscopic investigation was done on the effect of adding nano-clay-
particles into the aluminum matrix on the wear behaviors of piston aluminum-silicon alloy …

This paper experimentally evaluates the fretting fatigue properties of cast Al-Si-Cu-T6 alloys
against nodular cast irons with two surface roughnesses. A softening phenomenon contrary …

Casting aluminum alloy faces challenges during service, such as micro defects, low surface
hardness, and inadequate fretting fatigue performance. This study employs acousto …

A study was conducted to compare the pure fatigue and fretting fatigue properties of AM60
magnesium alloys, with and without 3D-printed PLA coatings. The PLA coating layers led to …

In this article, the sensitivity analysis of heat treatment parameters including the solutioning
time, ageing temperature, and addition of nano-particles on the hardness of the piston …