Purpose Engineering components/structures with geometric discontinuities normally bear
complex and variable loads, which lead to a multiaxial and random/variable amplitude …

Fatigue design of engineering structures is typically based on lifetime calculation using a
cumulative damage law. The linear damage rule by Miner is the universal standard for …

The paper presents a review of multiaxial fatigue failure criteria based on the critical plane
concept. The criteria have been divided into three groups, according to the fatigue damage …

The present paper deals with multiaxial fatigue behaviour of severely notched components
made of titanium grade 5 alloy (Ti–6Al–4V). The experimental tests have been carried out …

Nowadays, the estimation of fatigue life under multiaxial random loading is still an extremely
complex task. In this paper, a comprehensive review of the multiaxial random fatigue criteria …

The paper deals with the multi‐axial fatigue strength of notched specimens made of
39NiCrMo3 hardened and tempered steel. Circumferentially V‐notched specimens were …

Welded residual stress and stochastic traffic at the deck-to-rib welded joints in the orthotropic
steel deck (OSD) of bridges highly affects the fatigue life of bridges. This study presents a …

The low-cycle, strain-controlled fatigue tests have been conducted on CuZn37 brass (ASTM:
C27200, EN: CW508L). Machined specimens have been subjected to uniaxial, proportional …

The paper deals with multi-axial fatigue strength of notched specimens made of C40 carbon
steel (normalised state), subjected to combined tension and torsion loading, both in-phase …

A continuum approach to modeling of high-cycle fatigue is proposed. The approach takes a
very simple and appealing form and is based on the concepts of a moving endurance …