Reconstructions allow the evaluation of the microtexture before phase transformation from
that measured by EBSD after phase transformation. Even though they have been applied …

The intervariant boundary characteristics of a commercially pure Ti microstructure formed by
the β→ α martensitic phase transformation were described according to the crystallography …

The formation mechanism of banded microstructures of an electron beam melted
engineering intermetallic Ti–48Al–2Cr–2Nb alloy, the solidification behavior, and the heat …

High-strength titanium alloys are necessary and essential in aviation and aerospace fields.
Attempt to enhance the strength of the most widely used Ti-6Al-4V alloy is significant …

It is well established in literature that, when processing intermetallic γ-TiAl components by
electron beam powder bed fusion, a banded microstructure is frequently formed because of …

A detailed microstructural examination endeavoring to understand the interfacial
phenomena yielding to cohesion in solid-state assembling processes was performed. This …

A common challenge in direct energy deposition (DED) is eliminating the anisotropy in
mechanical performance associated with microstructure and the formation of coarse …

Abstract Linear Friction Welding (LFW) is a solid-state joining process producing narrow
joints mainly developed for the aircraft industry. The thermo-mechanical loads involved in …

Two sets of TiAl-based powders were consolidated by spark plasma sintering (SPS) using
identical processing conditions. Both were prealloyed powders obtained by atomization, but …

Characterization of the austenite phase at high temperatures is important for understanding
the microstructural evolution during steel processing. The austenite phase structure can be …