The polymer derived ceramics with complex shapes were prepared using the low-cost liquid
crystal display (LCD) 3D printing technology. In this paper, we not only synthesized a liquid …

This review discusses cationic UV-curing processes of vinyl ethers, propenyl ethers, and
epoxy monomers. Cationic photopolymerization based on photogeneration of acid from …

Epoxidized soybean oil (ESO) thermosets show poor performance owing to the low cross-
linking density and flexibility of their backbone structure. Herein, fully bio-derived …

The development and fabrication of high-performance renewable 3D objects with moderate
elongation and high mechanical strength via 3D printing are highly desirable in the ongoing …

Purpose–To operate a multiple material stereolithography (MMSL) system, a material build
schedule is required. The purpose of this paper is to describe a scheduling and process …

A UV-curable cardanol-based monomer (ECGE) was prepared using cardanol and
epichlorohydrin, followed by epoxidation of the unsaturation in alkyl side chains of cardanol …

Recently, a multiple-material stereolithography (MMSL) system was introduced, which
included the novel feature of stacking different photocurable resins to produce a multiple …

In this work, a melamine functionalized molybdenum disulfide (M-MoS2) was prepared and
used as fillers to form epoxy (EP)/MoS2 nanocomposites. The effects of molybdenum …

We present a novel methodology to simultaneously monitor of the degree of cure and curing
shrinkage of thermosetting formulations. This methodology is based on the observation of …

UV‐curing 3D printing technology is one of the technologies with the highest molding
efficiency and accuracy in the field of 3D printing. At present, the main problems of UV …