Nickel-based superalloys are subject to severe microsegregation and exhibit anisotropic
properties during laser metal deposition (LMD), which restricts their wide application in the …

In general, the components prepared by selective laser melting (SLM) possess high strength
but low ductility. It is of great significance to obtain the SLMed samples with the excellent …

This work examines the hot compression behavior of additively manufactured M789 steel via
laser powder bed fusion (LPBF) at temperatures ranging from 850° C to 1050° C and strain …

Herein, the effect of multiple laser shock peening (LSP) on fatigue performance of
aluminized steel and de-twinning behavior during cyclic deformation are investigated …

Novel train rails/wheels with low-carbon bainitic microstructure have drawn much attention
recently owing to their good match of strength and toughness in mechanical properties from …

Deformation‐induced mechanisms, namely, transformation‐induced plasticity (TRIP) and
twinning‐induced plasticity (TWIP), are primarily responsible for improved tensile properties …

A new cobalt-based coating, CoNiTi, was developed for brake disc applications. The effect
of temperature on the tensile and thermal fatigue cracking properties of CoNiTi was …

The effect of grain boundary character distribution (GBCD) on hydrogen-induced cracks
(HICs) initiation and propagation in nickel-saving austenitic stainless steel was investigated …

Developing low magnetic stainless-steel plates with high yield strength while ensuring good
plasticity, corrosion resistance, and paramagnetism is a tough technical challenge …

In this study, the microstructure and mechanical properties of Fe-30Mn-10Al-1.57 C-0.3 Si-
2.3 Cr-0.6 Ti high Al/Mn lightweight steel subjected to the hot rolling process at different …