Ag-Based nanocomposites: synthesis and applications in catalysis
G Liao, J Fang, Q Li, S Li, Z Xu, B Fang - Nanoscale, 2019 - pubs.rsc.org
Ag-Based nanocomposites, including supported Ag nanocomposites and bimetallic Ag
nanocomposites, have been intensively investigated as highly efficient catalysts because of …
nanocomposites, have been intensively investigated as highly efficient catalysts because of …
Theoretical and applied aspects of hydrodechlorination processes—catalysts and technologies
MR Flid, LM Kartashov, YA Treger - Catalysts, 2020 - mdpi.com
The commercial implementation of hydrodechlorination processes will be an essential step
in resolving the problem of environmentally sound organochlorine wastes processing. By …
in resolving the problem of environmentally sound organochlorine wastes processing. By …
Industrial chlorinated organic removal with elimination of secondary pollution: a perspective
P Sun, L Cheng, S Gao, X Weng… - The Journal of Physical …, 2023 - ACS Publications
Chlorinated volatile organic compounds (CVOCs) emitted from the industrial fabrication
process and coatings, pharmacy, and incineration are toxic to the environment and humans …
process and coatings, pharmacy, and incineration are toxic to the environment and humans …
Synthesis of very highly dispersed platinum catalysts supported on carbon xerogels by the strong electrostatic adsorption method
Highly dispersed Pt/carbon xerogel catalysts are obtained by applying the “strong
electrostatic adsorption”(SEA) of hexachloroplatinic acid to carbon xerogels (PZC= 9.4) and …
electrostatic adsorption”(SEA) of hexachloroplatinic acid to carbon xerogels (PZC= 9.4) and …
Stability of a carbon gel electrode when used for the electro-assisted removal of ions from brackish water
A porous carbon gel obtained from the poly-condensation of resorcinol and formaldehyde
was synthesized and used as an electrode material for the capacitive deionization (CDI) of …
was synthesized and used as an electrode material for the capacitive deionization (CDI) of …
Synthesis optimization of organic xerogels produced from convective air-drying of resorcinol–formaldehyde gels
Resorcinol–formaldehyde gels were produced at 50, 70 and 90° C and with three different
R/C ratios (500, 1000 and 2000). The effect of these variables combined with that of aging …
R/C ratios (500, 1000 and 2000). The effect of these variables combined with that of aging …
Remarkable effect of postsynthesis preparation procedures on catalytic properties of Ni-loaded BEA zeolites in hydrodechlorination of 1, 2-dichloroethane
A Śrębowata, R Baran, D Łomot, D Lisovytskiy… - Applied Catalysis B …, 2014 - Elsevier
Abstract Ni 2.0 SiBEA and Ni 2.0 HAlBEA zeolites were prepared by two different
procedures:(i) a two-step postsynthesis method that consist of (1) creation of vacant T-atom …
procedures:(i) a two-step postsynthesis method that consist of (1) creation of vacant T-atom …
RF xerogels with tailored porosity over the entire nanoscale
Resorcinol–formaldehyde organic xerogels were synthesized by means of microwave
heating using precursor solutions with pH values ranging from 2 to 9 and dilution ratios …
heating using precursor solutions with pH values ranging from 2 to 9 and dilution ratios …
Effect of pore geometry on the electrocatalytic performance of nickel cobaltite/carbon xerogel nanocomposite for methanol oxidation
A new nickel cobaltite/carbon xerogel nanocomposite (NiCo 2 O 4/CX) is obtained by
preparing carbon xerogel (CX) by using sol-gel technique followed by growing the NiCo 2 O …
preparing carbon xerogel (CX) by using sol-gel technique followed by growing the NiCo 2 O …
Controlling the surface chemistry of carbon xerogels using HNO3-hydrothermal oxidation
AMT Silva, BF Machado, JL Figueiredo, JL Faria - Carbon, 2009 - Elsevier
HNO3-hydrothermal oxidation is used to finely adjust the amount of oxygenated surface
groups on a carbon xerogel to a desired degree. The extent of carbon surface …
groups on a carbon xerogel to a desired degree. The extent of carbon surface …