To investigate the dynamic recrystallization (DRX) mechanism and texture evolution of Ti-
22Al-25Nb alloy during the thermal mechanical processing, plane-strain compression tests …

Interstitial alloying in CrMnFeCoNi-based high-entropy alloys is known to modify their
mechanical properties. Specifically, strength can be increased due to interstitial solid …

Centimeter-grade coarse grains commonly exist in heavy ingots of Ti 2 AlNb-based alloy
and severely deteriorate their workability. To investigate the refinement of coarse grains …

The hot deformation behavior and microstructural evolution of Pb-Mg-10Al-0.5 B alloy in the
strain rate range of 0.01–10 s− 1 and the temperature range of 493–653 K were investigated …

The hot-deformation behavior of the extruded Ti-22Al-25Nb alloy was investigated by
compression testing in the 1213–1333 K temperature range, under a 0.001–1.0 s− 1 strain …

To meet the commercial application, the mechanical properties of Ti 2 AlNb-based alloys
must be improved. However, the strengthening mechanism of the Ti 2 AlNb-based …

Hot compression tests were performed on the TiBw/Ti60 composite in the single β phase
region to study the microstructure evolution and deformation mechanisms. The stress-strain …

The effect of primary O phase on thermal compressive deformation behavior of a Ti 2 AlNb-
based alloy are investigated at temperatures from 990° C to 1020° C and strain rate range …

The high-temperature deformation behavior of Ti 2 AlNb sheet was studied by the uniaxial
tensile tests at the temperatures from 910° C to 1000° C with the strain rates 0.0004–0.1 s …

Abstract In situ Ti-6Al-4V/TiB composites with different contents of TiB were prepared by
SPS. The flow behavior of the composites deformed at temperatures of 900~ 1200° C and …