Microstructure and mechanical properties of high-strength, low-alloy steel thin-wall fabricated with wire and arc additive manufacturing
High-strength, low-alloy (HSLA) steel has attracted much attention in the manufacturing
industry because of its good combination of high strength and toughness, low cost, and …
industry because of its good combination of high strength and toughness, low cost, and …
The influence of centerline segregation on impact toughness in welding heat-affected zone of X70 pipeline steel
F Guo, H Zhang, W Liu, X Wang, C Shang - Metals, 2024 - mdpi.com
The influence of centerline segregation on the low-temperature impact toughness of the heat-
affected zone (HAZ) of welded joints was studied by welding experiments on X70 steel …
affected zone (HAZ) of welded joints was studied by welding experiments on X70 steel …
Weldability and mechanical behavior of CMT welded AISI 430 and HARDOX 500 steels
ME Kocadağistan, O Çinar, T Teker - Materials Testing, 2023 - degruyter.com
In this study, AISI 430 and HARDOX 500 steels were joined by cold metal transfer (CMT)
welding method. The properties and microstructural changes of the welding and HAZ …
welding method. The properties and microstructural changes of the welding and HAZ …
Study of the Relationship between Entropy and Hardness in Laser Cutting of Hardox Steel
CC Girdu, C Gheorghe - Materials, 2023 - mdpi.com
The article presents the findings of a study on the machining of 10 mm thick Hardox 400
steel plates using the CO2 laser. The purpose of the investigation was to investigate the …
steel plates using the CO2 laser. The purpose of the investigation was to investigate the …
Effect of cobalt on Microstructure and toughness properties of 9Cr-1.8 W-0.4 Ni-xCo weld metal
F Kabakcı, M Acarer - International Journal of Pressure Vessels and Piping, 2024 - Elsevier
In this research, microstructural characterization and mechanical properties of 9% Cr, 0.4%
Ni (including W and Mo) steel weld metal with alloyed cobalt were investigated. Due to their …
Ni (including W and Mo) steel weld metal with alloyed cobalt were investigated. Due to their …
Microstructure and Mechanical Properties Ultrasonic Assistance Laser Welded Joints of Beta Titanium Alloy with Multiple Vibrators
S Wang, P Dong, F Chai, L Gao, S Zhang, C Zhang - Metals, 2024 - mdpi.com
Aiming at the problem of deterioration of the properties of beta titanium alloy welded joints
due to many porosity defects and coarse grains, multi-vibrator ultrasonic-assisted laser …
due to many porosity defects and coarse grains, multi-vibrator ultrasonic-assisted laser …
Effects of Weld Metals and Heat Input on the Softening of Gas Metal Arc Welded Joint for Abrasion Resistant Steel
J Xiong, F Wang, X Dong, K Wang, W Chen… - Journal of Materials …, 2024 - Springer
The softening of welded joints for abrasion resistant steel NM450 was systematically
investigated by combining numerical simulation and welding experiments including …
investigated by combining numerical simulation and welding experiments including …