Abstract Metastability-engineering, eg, transformation-induced plasticity (TRIP), can
enhance the ductility of alloys, however it often comes at the expense of relatively low yield …

Over the past few decades, titanium (Ti) alloys containing fully or mostly body-centred cubic
β phase in metastable state have received considerable interest due to their elevated …

Remarkable mechanical properties have been reported for CoCrFeMnNi-based high
entropy alloys (HEAs) in recent literature, making these HEAs potentially attractive …

Dynamic recrystallization (DRX) within adiabatic shear bands forming during the fracture of
TRIP-TWIP β− metastable Ti-12Mo (wt%) alloy was recently reported. The formation of 1-3 …

In present work, the Ti422 (Ti-4.5 Al-2.5 V–2Fe) alloy with transformation-induced plasticity
(TRIP) effect was designed. The combined effects of the α′ martensite and the mechanical …

The insufficient low-cycle fatigue properties of titanium alloys under cyclic heavy loading are
regarded as a challenge for their security in service. In recent years, a large number of …

To overcome the strength-plasticity trade-off in the structural titanium alloys, a novel
metastable β titanium alloy Ti-5Mo-4Cr-1V-1Zr (Ti-5411) with high strength and high …

The plastic deformation parameters are crucial for the grain size of gradient nanostructured
(GNS) materials, and the multiscale grain structure within the GNS layer has a significant …

In this study, a simple two-step heat treatment is proposed to design a TRIP metastable β-Zr
alloy with good strength-ductility synergy by introducing heterogeneous α precipitates. The …

This study proposes a thorough investigation of the mechanical properties of two β
metastable titanium alloys (Ti–12Mo and Ti-8.5 Cr-1.5 Sn (wt%)) processed by laser powder …