Accident-tolerant fuel (ATF) cladding materials aim to improve fuel reliability and safety
during accident scenarios in water-cooled reactors. These ATF cladding should also perform …

There are various widely known methods for producing nanomaterials: physical, chemical,
and mechanical. There are also different definitions concerning manufacturing and …

In order to investigate the effect of multi-axial forging on microstructural evolution and
mechanical properties, warm multi-axial forging (MAF) on stainless steel 316L is performed …

Mechanical properties and microstructure evolution of Al 2014 alloy subjected to cryoforging
(MDF) to a cumulative strain of 1.2, 1.8, and 2.4 were investigated in the present work. The …

In this study, the mechanical properties in a Zr-Nb alloy plate with bimodal basal texture
microstructure have been evaluated by tensile, Vickers hardness and nano-indentation …

Abstract Effect of annealing and solution treatment prior to cryorolling on the formation of
initial structure influencing microstructure formation from nano to micron scale and resultant …

The growth of α-Al 2 O 3 layer on ODS FeCrAl alloys NF12 (Fe-12Cr-6Al-0.5 Ti-0.4 Y-0.4 Zr-
0.25 Ex. O) and SP10 (Fe-15Cr-7Al-0.5 Ti-0.4 Y-0.4 Zr-0.24 Ex. O) was investigated by …

With the goal of increasing the performance and safety of existing nuclear power plants, the
research and development of Accident Tolerant Fuels (ATFs) are of high priority within the …

Zirconium alloys are primarily used in nuclear applications as a cladding material due to its
low neutron absorption, excellent mechanical strength, ductility, oxidation, and corrosion …

In this paper, room temperature forging (RTF, 25° C) and warm forging (WF, 200° C) of Al-
Mg-Si alloy were performed, for strengthening the 6082 Al alloy at low applied strain. Overall …