High demands are placed on the microstructure and performance of magnesium (Mg) alloy
characteristic forgings since they are utilized as significant lightweight structural components …

Micro laser powder bed fusion (μLPBF) technology offers great benefits to industries as it
enables fabrication of complicated metallic components with greater accuracy and minimum …

In this work, mechanical properties, microstructure evolution mechanism, texture variation
process and deformation mechanism of a near-α CT20 titanium alloy with different hot and …

The tube spinning process has attracted much attention because of its simple tooling and
good surface finish. This review presents a comprehensive survey of the tube spinning …

Coatings with a thickness from~ 40 to~ 50 µm on Ti6Al4V titanium alloys were formed by
plasma electrolytic oxidation (PEO) in a silicate-hypophosphite electrolyte with the addition …

In this work, pure Ti and Ti-5at.% Al alloy are both cold rolled, and then characterized to
observe deformation twins {10 1¯ 1}. Many two-layer steps are observed at the {10 1¯ 1} …

The effect of strong transverse (T) texture on anisotropy deformation mechanism of Ti60
plate was in-situ investigated using the EBSD and the high resolution-digital image …

In the present study, the anisotropic formability and underlying deformation mechanism of
near-α TA32 titanium alloy sheet under continuous nonlinear strain paths (CNSPs) at high …

The microstructural evolution and mechanical properties of low-cost Ti-5.5 Al-1Fe-3.5 Cr-3.2
Zr-0.2 Si alloy during power spinning and after three types of heat-treatment routines (low …

An in-depth understanding of the crystal orientation evolution during hot rolling of TiB
whisker (TiBw)/TA15 composites and the anisotropy of the as-rolled plates can help fully …