High-temperature superconducting coated conductors (CCs) are considered an enabling
ultra-high field (UHF) tape-conductor technology due to their extremely high engineering …

The ITER magnet procurement is now well underway. The magnet systems consist of 4
superconducting coil sets (toroidal field (TF), poloidal field (PF), central solenoid (CS) and …

Abstract The Chinese Fusion Engineering Test Reactor (CFETR) superconducting magnet
system was designed by the National Integration Design Group for Magnetic Confinement …

Many structural health monitoring (SHM) techniques have been investigated for damage
detection in woven glass fiber reinforced polymer (GFRP) laminates. Recently, the GFRP …

The performance of four Nb 3 Sn conductors for the ITER central solenoids was tested. The
current sharing temperatures (T cs) were measured over approximately 9000 …

This review celebrates the centenary of Kamerlingh Onnes' discovery of superconductivity
and also the 50th anniversary of the first conference to discuss superconducting magnets …

The central solenoid (CS) of the ITER tokamak contributes to the inductive flux to drive the
plasma, to the shaping of the field lines in the divertor region and to vertical stability control …

The fabrication of nine ITER toroidal field coils (TFCs) has been completed successfully in
Japan. When a set of 18 TFCs are installed around the ITER vacuum vessel, it generates a …

In this survey, we focus on Nb-based binary intermetallic compounds, which have been
widely used over the last 40 years to develop a range of superconducting applications …

We present a resistivity study of single-and polycrystalline Nb 3 Sn under pressure up to 9.3
GPa. Despite quite different pressure responses, T c of both samples is diminished with …