Recent progress in the development of anode materials for solid oxide fuel cells

PI Cowin, CTG Petit, R Lan… - Advanced Energy …, 2011 - Wiley Online Library
The field of research into solid oxide fuel cell (SOFC) anode materials has been rapidly
moving forward. In the four years since the last in‐depth review significant advancements …

Solid oxide fuel cell anode materials for direct hydrocarbon utilization

XM Ge, SH Chan, QL Liu, Q Sun - Advanced Energy Materials, 2012 - Wiley Online Library
Solid oxide fuel cells (SOFC) are highly efficient energy conversion devices with the
advantage of directly utilizing hydrocarbon fuels. Starting with a short introduction about the …

Enhancing CO2 electrolysis through synergistic control of non-stoichiometry and doping to tune cathode surface structures

L Ye, M Zhang, P Huang, G Guo, M Hong, C Li… - Nature …, 2017 - nature.com
Sustainable future energy scenarios require significant efficiency improvements in both
electricity generation and storage. High-temperature solid oxide cells, and in particular …

Step-change in high temperature steam electrolysis performance of perovskite oxide cathodes with exsolution of B-site dopants

G Tsekouras, D Neagu, JTS Irvine - Energy & Environmental Science, 2013 - pubs.rsc.org
B-site doped, A-site deficient perovskite oxide titanates with formula La0. 4Sr0. 4Mn+ xTi1−
xO3− γ− δ (M= Fe3+ or Ni2+; x= 0.06; γ=(4− n) x/2) were employed as solid oxide …

High-Figure-of-Merit Thermoelectric La-Doped A-Site-Deficient SrTiO3 Ceramics

Z Lu, H Zhang, W Lei, DC Sinclair… - Chemistry of …, 2016 - ACS Publications
The structure and thermoelectric (TE) properties of La-doped, A-site-deficient SrTiO3 (Sr1–3
x/2La x TiO3) ceramics sintered in air and N2/5% H2 have been investigated. Air-sintered …

Progress in La-doped SrTiO 3 (LST)-based anode materials for solid oxide fuel cells

X Zhou, N Yan, KT Chuang, J Luo - Rsc Advances, 2014 - pubs.rsc.org
Solid oxide fuel cells (SOFCs) have appeared as a promising technology for a wide variety
of potential commercial applications to lessen the urgency of energy shortage and …

Pr-Doped SrTi0.5Mn0.5O3−δ as an Electrode Material for a Quasi-Symmetrical Solid Oxide Fuel Cell Using Methane and Propane Fuel

Y Zhang, X Zhang, J Ni, C Ni - ACS Applied Materials & Interfaces, 2023 - ACS Publications
The use of identical electrodes for both the cathode and the anode in a symmetrical solid
oxide fuel cell (SSOFC) can simplify the preparation process and increase the durability of …

Fabrication and modification of solid oxide fuel cell anodes via wet impregnation/infiltration technique

Z Liu, B Liu, D Ding, M Liu, F Chen, C Xia - Journal of Power Sources, 2013 - Elsevier
The future commercialization and application of solid oxide fuel cell (SOFC) technologies
requires the development of novel anode materials with excellent performance and stability …

Structure and Properties of La0.4Sr0.4TiO3 Ceramics for Use as Anode Materials in Solid Oxide Fuel Cells

D Neagu, JTS Irvine - Chemistry of Materials, 2010 - ACS Publications
In this work, La0. 4Sr0. 4TiO3-based ceramics intended for use as anode materials in solid
oxide fuel cells were investigated. The material was found to preserve its cubic structure …

Direct synthesis of methane from CO 2/H2O in an oxygen-ion conducting solid oxide electrolyser

K Xie, Y Zhang, G Meng, JTS Irvine - Energy & Environmental Science, 2011 - pubs.rsc.org
Synthetic fuels produced from CO2/H2O are an attractive alternative energy carrier. Here we
demonstrate a novel strategy to electrochemically convert CO2/H2O into hydrocarbon in a …