Micro-indentation has been widely used for testing the mechanical properties of NiTi SMAs.
In the present study, large-scale molecular dynamics (MD) simulations of nano-indentation …

A switchable dry adhesive based on a nickel–titanium (NiTi) shape‐memory alloy with an
adhesive silicone rubber surface has been developed. Although several studies investigate …

The link between microstructure and mechanical properties is investigated for a superelastic
Ni–Mn–Ga microwire with 226 μm diameter, created by solidification via the Taylor method …

The primary goal of this work is to examine the effect of in situ substrate conditions viz.,
substrate bias voltage and substrate temperature on the structural, morphological …

The two‐way shape‐memory effect (TWSME) in Nickel–titanium (NiTi) alloys is of interest for
applications in aerospace, biomedicine, and microengineering due to its reversible shape …

Abstract Nickel Titanium (NiTi) alloys have been used for many years based on their unique
ability to exhibit the shape-memory and pseudoelastic effects. The indentation-induced two …

The microstructure, substructure, transformation temperature, and recovery ratio of a novel
Ni 45 Pt 5 Ti 30 Hf 20 alloy are reported in the current work. The properties of binary TiNi …

This study investigated the effect of temperature on indentation-induced one-way and two-
way shape memory properties in Ti-50.3 at% Ni alloy. Indentation temperatures ranged from …

The hot compression tests in a wide range of temperature were employed to produce the
semi‐finished products of equiatomic NiTi shape memory alloy holding enhanced …

In this study, Vickers indentation was used to investigate the two-way shape-memory effect
(TWSME) in an austenitic Ti-50.9 at.% Ni alloy, exposed to different heat treatments. Three …