This research aims to investigate the simulation of a pilot-scale photocatalytic reactor based
on cobalt-doped ZnO films, where the photocatalyst films were initially assessed on a lab …

Tailoring functional thin films and coating by rapid solvent-based processes is the basis for
the fabrication of large scale high-end applications in nanotechnology. Due to solvent loss of …

Nanostructure ZnO and ZnO: Co films were deposited onto borofloat glass substrates by the
sol–gel method using spin coating technique. X-ray diffraction (XRD) study was used to …

Transparent conducting indium doped zinc oxide was deposited on glass substrate by
ultrasonic spray method. The In doped ZnO samples with indium concentration of 3wt …

The undoped and fluorine doped tin oxide (SnO 2) thin films are synthesized by using cost-
effective spray ultrasonic technique; the films are sprayed on heated glass substrates at …

Undoped nickel oxide (NiO) thin films were deposited on 500° C heated glass substrates
using spray pyrolysis method at (0.015–0.1 M) range of precursor. The latter was obtained …

Transparent thin layers of cobalt-doped ZnO were produced with the pulsed laser deposition
method. The cobalt content of the original solid solution was 20% at. The crystallographic …

ZnO nanostructured thin layers doped with cobalt (0%, 2%, 4%, and 6%) were successfully
deposited on glass substrates via nebulized spray pyrolysis. The XRD and FE-SEM …

In this work Cr doped ZnO thin films were deposited onto glass substrates by RF magnetron
sputtering using a powder target at room temperature in order to study the effect of Cr …

We present a comprehensive investigation of the electromagnetic properties of CdAB2
compounds, where A represents Cr, Mn, or Fe, and B denotes P or As. To investigate the …