Effect of Ti content and ball-milling time on the microstructural, thermal, and microhardness properties of AlCoCuNiTi high entropy alloys
M Okumuş, F Kaya - Materials Chemistry and Physics, 2024 - Elsevier
In this study, AlCoCuNiTi high entropy alloy was produced by high-energy ball-milling
(mechanical alloying) and sintering methods. The microstructural, thermal, and …
(mechanical alloying) and sintering methods. The microstructural, thermal, and …
Mechanical characterization of Mg-B4C nanocomposite fabricated at different strain rates
GH Majzoobi, K Rahmani - … Journal of Minerals, Metallurgy and Materials, 2020 - Springer
Magnesium has wide application in industry. The main purpose of this investigation was to
improve the properties of magnesium by reinforcing it using B 4 C nanoparticles. The …
improve the properties of magnesium by reinforcing it using B 4 C nanoparticles. The …
Structural stability of mechanically alloyed amorphous (FeCoNi) 70Ti10B20 under high-temperature and high-pressure
Abstract Nanostructured (FeCoNi) 70 Ti 10 B 20 (at%) alloy was synthesized by mechanical
alloying from elemental powder mixture of Fe, Co, Ni, Ti and B using ball milling. The effect …
alloying from elemental powder mixture of Fe, Co, Ni, Ti and B using ball milling. The effect …
Comprehensive study on quasi-static and dynamic mechanical properties and wear behavior of Mg—B4C composite compacted at several loading rates through …
K Rahmani, GH Majzoobi, G Ebrahim-Zadeh… - … of Nonferrous Metals …, 2021 - Elsevier
The present study aims to fabricate and evaluate the mechanical properties and wear
behavior of Mg metal matrix composite, reinforced by 0, 1.5, 3, 5 and 10 vol.% B 4 C …
behavior of Mg metal matrix composite, reinforced by 0, 1.5, 3, 5 and 10 vol.% B 4 C …
Influence of mechanical alloying on structural, thermal, and magnetic properties of Fe50Ni10Co10Ti10B20 high entropy soft magnetic alloy
M Panigrahi, B Avar - Journal of Materials Science: Materials in …, 2021 - Springer
A multicomponent with functional Fe 50 Ni 10 Co 10 Ti 10 B 20 (at.%) high entropy soft
magnetic alloy powders were produced from the elemental powders by mechanical alloying …
magnetic alloy powders were produced from the elemental powders by mechanical alloying …
Microstructural examination and mechanical characterization of Ti/HA and Ti/SiO2 functionally graded materials fabricated at different loading rates
Functionally graded material (FGM) is a heterogeneous composite material that consists of
two or more constituent phases with continuous changes in the microstructure from one …
two or more constituent phases with continuous changes in the microstructure from one …
The effect of particle size on microstructure, relative density and indentation load of Mg-B4C composites fabricated at different loading rates
K Rahmani, GH Majzoobi - Journal of Composite Materials, 2020 - journals.sagepub.com
The effect of reinforcing particle size on microstructure, relative density and indentation of
Mg reinforced by 0, 1.5, 3, 5 and 10% volume fractions of nano-and micro-sized B4C was …
Mg reinforced by 0, 1.5, 3, 5 and 10% volume fractions of nano-and micro-sized B4C was …
Microstructure characterization and phase evolution of equiatomic AlCoMoFeNi high entropy alloy synthesized by mechanical alloying
The present study deals with the fabrication of a novel AlCoMoFeNi high-entropy (HEA)
alloy using mechanical alloying techniques. The developed HEA was characterized by X-ray …
alloy using mechanical alloying techniques. The developed HEA was characterized by X-ray …
Temperature effect on mechanical and tribological characterization of Mg–SiC nanocomposite fabricated by high rate compaction
In this paper, dynamic compaction is employed to produce Mg–SiC nanocomposite samples
using a mechanical drop hammer. Different volume fractions of SiC nano reinforcement and …
using a mechanical drop hammer. Different volume fractions of SiC nano reinforcement and …
Effects of aluminum and silicon carbide on morphological and mechanical properties of epoxy hybrid composites
S Rana, M Hasan, MRK Sheikh… - Polymers and Polymer …, 2022 - journals.sagepub.com
The present research focuses on the effects of aluminum (Al) and silicon carbide (SiC)
hybridization on mechanical and morphological properties of Al and SiC particles reinforced …
hybridization on mechanical and morphological properties of Al and SiC particles reinforced …