This paper presents the results of an investigation into the interaction between the various
electrical factors pertaining to resistivity tests in Perth sandy soil (specifically AC input …

Constructing road pavement and highways in tropical countries usually requires using
lateritic soils as pavement material. The degree of compaction during the placement of these …

The performance of three geosynthetic clay liners (GCLs) above arsenic-bearing gold mine
tailings is examined based on a series of laboratory column experiments conducted over a …

In the present study, an attempt is made to characterize the tailing material using the
electrical resistivity method through a series of laboratory experiments. Tailing materials are …

Electrical resistivity of soils are very important for various engineering projects, for example,
subsurface transmission of either heated fluids or high-voltage buried power cables; storage …

In closed hazardous waste (ie industrial) landfills, impermeable covers are used to seal in
the waste so as to minimise water infiltration and the accumulation of leachate inside the …

The aim of this work is to explore the potential of ERT to study the geometry and soundness
of the geomembrane that is commonly placed below the waste deposits to prevent leachate …

Electrical resistance tomography (ERT) is a non‐destructive evaluation (NDE) technique that
measures the voltages when electric current is injected in a body where damage induced …

This paper presents experimental and numerical studies on electrical resistivity of Perth
sand in its very loose state to very dense state. A simple laboratory experimental setup was …

This paper proposes a stress wave monitoring method for monitoring and locating leakage
through the impervious layer at a landfill to resolve the “first pollution, then discovery” …