Microwave (MW) dielectric ceramics are used in numerous electronic components for
modern wireless communication systems, including antennas, resonators, capacitors and …

Silicate ceramics are of considerable promise as high frequency dielectrics in emerging
millimetre wave applications including high bandwidth wireless communication and …

Dense microwave dielectric ceramics of Ce2 [Zr1− x (Al1/2Ta1/2) x] 3 (MoO4) 9 (CZMAT)(x=
0.02–0.10) were prepared by the conventional solid-state route. The effects of (Al1/2Ta1/2) …

Abstract 5G and forthcoming 6G communication systems require dielectric ceramics with low
relative permittivity (ε r) and near-zero temperature coefficient of resonant frequency (τ f) for …

In this work, the effects of divalent ions on the phase structure, microstructure, and
microwave dielectric properties of Mg 1.8 R 0.2 Al 4 Si 5 O 18 (R= Mg, Ca, Sr, Ba, Mn, Co …

Abstract In this paper,(1-x) LiWVO 6-xK 2 MoO 4 (LWVO-KMO, x= 60, 65, 70, 75, 80, 90 wt%)
composite ceramics with> 92% relative density were prepared by cold sintering at 160° C …

MgF 2 ceramics have been prepared via the standard solid-state reaction method, and their
microwave dielectric properties are reported for the first time. The permittivity (ε r) and quality …

Li4Ti3O8 composite ceramics were synthesized via the solid-state reaction method. The
microwave dielectric properties of these ceramics and their potential applications in …

A sustainable cold-sintering process was adopted to fabricate composites of (1–x)
SrFe12O19–x Li2MoO4, x= 0.4, 0.5, 0.6, and 0.7 with density up to 91%, and their broad …

Recently, the cold sintering process (CSP) has gained worldwide recognition from the
scientific community as a green and innovative fabrication technique due to the substantial …