Metal additive manufacturing (AM) refers to any process of making 3D metal parts layer-
upon-layer via the interaction between a heating source and feeding material from a digital …

Wear and friction are two unavoidable failures in mechanical systems with moving
components. Hence, the invention of new materials to curtail material losses and frictional …

High-entropy alloys (HEAs) coatings of CoCrFeNiW x (x= 0, 0.25, 0.5, 0.75, 1.0) were
fabricated on AISI1045 steel via laser cladding. The microstructure, microhardness and high …

A series of Al x TiZrNbHf refractory high entropy alloys (RHEAs) were prepared to
investigate the mechanical and wear properties. Despite the different crystal structures of …

In this paper, the wear and corrosion resistance of FeNiCoCrMo x (x: atomic ratio, x= 0, 0.15,
0.20, 0.25) high entropy alloy coatings (HEACs) which prepared by laser cladding (LC) …

Tribological behavior of the model AlCoCrFeNi 2.1 eutectic high-entropy alloy (EHEA)
sliding against different counterfaces including Al 2 O 3, Si 3 N 4, SiC ceramics and GCr15 …

The combination of technical advantages of high entropy alloys (HEAs) and manufacturing
capabilities of thermal spray (TS) offer potential towards new protective coatings to address …

In this study, a coherent ceramic strengthening wear-corrosion resistant CoCrNiMo high
entropy alloy coating was successfully fabricated on 304 stainless steel (304ss) by laser …

Abstract A novel Ti (C, N)-reinforced body-centered cubic (BCC)-based Cr 20 Cu 20 Fe 20
Ni 20 Al 20 high-entropy alloy (HEA) composite coating was prepared by a synchronized …

Extensive studies have been conducted on high entropy alloy composite coatings reinforced
with micro-sized ceramic particles at the room-temperature. However, studies on their high …