Optimizing wear behavior of TiN coated SS 316L against Ti alloy using Response Surface Methodology
Titanium nitride (TiN) is a hard ceramic biocompatible material, which is deposited over
stainless steel (SS) 316L to improve the mechanical and wear properties when sliding …
stainless steel (SS) 316L to improve the mechanical and wear properties when sliding …
A comprehensive review on recent developments in materials and technological parameters for plasma transferred arc hardfacing process
Critical equipments of process and heavy engineering industries are prone to significant
wear due to intense service conditions. Uneven and uncontrolled wear causes significant …
wear due to intense service conditions. Uneven and uncontrolled wear causes significant …
Temperature dependence of energy dissipation during nanoscale wear of AISI 304L stainless steel
In the sliding process, mechanical work is widely considered to be dissipated in the form of
heat. The dissipation of frictional energy, especially in scenarios involving material wear at …
heat. The dissipation of frictional energy, especially in scenarios involving material wear at …
A modified wear model considering contact temperature for spur gears in mixed elastohydrodynamic lubrication
C Zhou, M Xing, B Hu, Z Shi - Tribology Letters, 2020 - Springer
In this study, a modified wear model considering contact temperature for spur gears in mixed
elastohydrodynamic lubrication (EHL) is proposed. The contact temperature consists of bulk …
elastohydrodynamic lubrication (EHL) is proposed. The contact temperature consists of bulk …
Influence of argon pollution on the weld surface morphology
In this paper the surfaces of butt welded joints in steel tubes were analyzed using an optical
3D measurement system to determine the morphology and topographic parameters. It was …
3D measurement system to determine the morphology and topographic parameters. It was …
Microstructure and micro-abrasive wear of sintered yttria-containing 316L stainless steel treated by plasma nitriding
MFC Ordoñez, CLG Amorim, I Krindges… - Surface and Coatings …, 2019 - Elsevier
Plasma nitriding of austenitic stainless steel may result in the formation of a nitrided layer,
which is responsible for the increase in hardness, as well as wear and corrosion resistance …
which is responsible for the increase in hardness, as well as wear and corrosion resistance …
Investigation into Friction and Wear Characteristics of 316L Stainless-Steel Wire at High Temperature
M Huang, Y Fu, X Qiao, P Chen - Materials, 2022 - mdpi.com
The damping performance of metal rubber is highly correlated with the tribological
properties of the internal metal wires. In this paper, the friction and wear characteristics of …
properties of the internal metal wires. In this paper, the friction and wear characteristics of …
A study of processing and high-temperature sliding wear behaviour of Inconel-625 alloy TIG weld cladding
N Kamboj, L Thakur - International Journal of Materials …, 2022 - inderscienceonline.com
A clad layer of Inconel-625 alloy was successfully deposited on the surface of AISI-304
stainless steel substrate using the tungsten inert gas welding process. Claddings of similar …
stainless steel substrate using the tungsten inert gas welding process. Claddings of similar …
The effectiveness of diamond-like carbon aC: H: Si coatings in increasing the cutting capability of radius End mills when machining heat-resistant nickel alloys
SN Grigoriev, MA Volosova, SV Fedorov, MS Migranov… - Coatings, 2022 - mdpi.com
The main purpose of this paper was to study the efficiency of using diamond-like carbon
(DLC) coatings based on aC: H: Si with a pre-formed CrAlSiN sublayer to increase the …
(DLC) coatings based on aC: H: Si with a pre-formed CrAlSiN sublayer to increase the …
Synergistic effects of 3D porous graphene and T161 as hybrid lubricant additives on 316 ASS surface
W Gu, K Chu, Z Lu, G Zhang, S Qi - Tribology International, 2021 - Elsevier
An effective and simple method is reported to enhance the property and economics of
graphene lubricants, that is, 3D porous graphene and T161 are proposed as hybrid lubricant …
graphene lubricants, that is, 3D porous graphene and T161 are proposed as hybrid lubricant …