To balance the manufacturing cost and customizability of automotive parts, a hybrid
manufacturing process combining die-casting and selective laser melting (SLM) is …

Abstract “Compound casting” was used for production of lightweight Al/Mg couples. In order
to prepare the Al/Mg couples using this process, each of the aluminum and magnesium …

Different surface treatment methods of steel inserts, including aluminizing, coating surface
modifier as well as a combination of coating surface modifier and aluminizing (surface …

Aluminum–copper bimetal was prepared by compound casting liquid aluminum onto copper
bars and solidifying under applied pressure. The effect of pouring temperature and applied …

This research aimed to produce Al/Cu bimetal through the compound casting process. The
control of the thickness and type of IMCs layers at Al/Cu interface were investigated by …

Abstract In this work, Al7SiMg/steel compound castings were produced through a low-
pressure die casting process. All steel inserts were galvanized, where half of them were flux …

In the present work, the effects of zinc coating on interfacial microstructures and mechanical
properties of the aluminum/steel bimetallic composites prepared by a solid-liquid diffusion …

Keeping in view the structural applications of aluminum alloys, squeeze overcasting has
been considered an attractive alternative to deal with the inherent casting defects at the …

The lost foam casting (LFC) process was used to prepare the A356 aluminum and AZ91D
magnesium bimetallic castings, and the interface characteristics of the reaction layer …

The joining of Al and Cu commercially pure metals using the compound casting process has
been investigated where an aluminium melt is cast onto a solid cylindrical copper insert. The …