A review on the processing technologies of carbon nanotube/silicon carbide composites
D Han, H Mei, S Xiao, KG Dassios, L Cheng - Journal of the European …, 2018 - Elsevier
Due to the extraordinary electronic, mechanical, chemical, thermal, magnetic, and optical
properties, carbon nanotube (CNT), an excellent one-dimensional nano-material, has been …
properties, carbon nanotube (CNT), an excellent one-dimensional nano-material, has been …
Characterization of the interactions within fine particle mixtures in highly concentrated suspensions for advanced particle processing
This paper aims to summarize recent investigations into the dispersion of fine particles, and
the characterization of their interactions, in concentrated suspensions. This summary will …
the characterization of their interactions, in concentrated suspensions. This summary will …
[HTML][HTML] Enhanced fabrication of silicon carbide membranes for wastewater treatment: From laboratory to industrial scale
An environmental-friendly procedure has been developed for the fabrication of pure silicon
carbide membranes on macroporous SiC support via ceramic processing. Water dispersions …
carbide membranes on macroporous SiC support via ceramic processing. Water dispersions …
Enhancing the sliding-wear resistance of SiC nanostructured ceramics by adding carbon nanotubes
SiC nanostructured ceramics without and with carbon nanotubes (CNTs) were prepared by
aqueous colloidal processing plus liquid-phase assisted spark-plasma sintering, and their …
aqueous colloidal processing plus liquid-phase assisted spark-plasma sintering, and their …
Liquid-phase assisted flash sintering of SiC from powder mixtures prepared by aqueous colloidal processing
The effects were investigated of the starting particle size (ie, nanometer or submicrometer
powders), content of Y 3 Al 5 O 12 additives (YAG; in the range 5–20 wt.%), and difference of …
powders), content of Y 3 Al 5 O 12 additives (YAG; in the range 5–20 wt.%), and difference of …
Liquid-phase assisted spark-plasma sintering of SiC nanoceramics and their nanocomposites with carbon nanotubes
The appropriate conditions for liquid-phase assisted spark-plasma sintering (SPS) were
identified for the fabrication of both SiC nanoceramics and their nanocomposites with carbon …
identified for the fabrication of both SiC nanoceramics and their nanocomposites with carbon …
Manufacturing B4C parts with Ti-Al intermetallics by aqueous colloidal processing
The aqueous colloidal processing of submicrometre B 4 C powder (∼ 0.6 μm) with coarse Ti-
Al powder (∼ 40 μm) as sintering additive was investigated. Firstly, by measuring the zeta …
Al powder (∼ 40 μm) as sintering additive was investigated. Firstly, by measuring the zeta …
Processing and mechanical properties of mullite and mullite–alumina composites reinforced with carbon nanofibers
A Cascales, N Tabares, JF Bartolomé, A Cerpa… - Journal of the European …, 2015 - Elsevier
In the present work homogeneous mullite and mullite–alumina composites reinforced with
carbon nanofibers (CNFs) were prepared. The stability of aqueous mullite and mullite–CNFs …
carbon nanofibers (CNFs) were prepared. The stability of aqueous mullite and mullite–CNFs …
Aqueous colloidal processing of nano-SiC and its nano-Y3Al5O12 liquid-phase sintering additives with carbon nanotubes
Carbon nanotubes (CNTs) have occasionally been observed to benefit the aqueous
colloidal processing of nano-SiC with its nano-Y 3 Al 5 O 12 liquid-phase-sintering additives …
colloidal processing of nano-SiC with its nano-Y 3 Al 5 O 12 liquid-phase-sintering additives …
Stabilisation, rheology and application of aqueous suspensions of oxidised vs. non-oxidised SiC powder
J Wiśniowska, Ł Zych, A Gubernat… - Materials Chemistry and …, 2023 - Elsevier
The study aimed at evaluating the stabilisation and rheological properties of aqueous
suspensions (30 vol%) of pristine (non-oxidised) and oxidised fine SiC powders which were …
suspensions (30 vol%) of pristine (non-oxidised) and oxidised fine SiC powders which were …