The effect of Nb addition (2, 5, 10 at.%) on the borosiliciding behavior of CoCrFeNiNb x high-
entropy alloy was studied. Vacuum arc melted CoCrFeNiNb x alloys consisted of FCC and …

This study focuses on the development of boron-alloyed tool steels. The influence of Cr
additions from 0 to 10 mass% on microstructural changes were investigated for a constant …

The chemical composition of high entropy alloys (HEAs) is complex and HEAs contain a
wide variety of alloying elements. The aim of this study was to investigate the effect of …

Low alloy steel was pack-borided at different processing temperatures (at 850, 950, and
1050° C) and times (2, 4, and 6 h). The microstructural characterisation of boronized steel …

The effect of a boronizing and siliciding process on CoCrFeNiHf0. 1–0.42 high entropy
alloys was examined in this study. When increasing the amount of added Hf in …

A simple and cost effective technique to obtain locally hardened composite layer on cast
alloy was previously developed based on advantages of liquid-sintering theory. This …

Boriding treatment was applied to AISI 1020 steel to improve its wear resistance. The
samples were characterized by X-ray diffraction (XRD), scanning electron microscopy …

The influence of molybdenum on the boronising behaviour of iron (with addition of 1, 2, 4, 8
and 16 wt-% Mo) was investigated by performing pack boronising at 1100° C for 3 h. The …

Binary Fe–W alloys with 1, 2, 4, 8, 12 and 16 at.-% W additions were prepared to investigate
the effect of tungsten on the boronising behaviour by performing pack boronising at 1100° C …

In this study, the effect of the addition of vanadium (V) on the densification, microstructure,
and wear behavior of borosintered powder metallurgy steels was investigated. Ball-milled …