High-temperature oxidation behaviour of CoCrNi medium-entropy alloy
The high-temperature oxidation behaviour of CoCrNi was investigated over different
exposure times (6, 12, 24, and 48 h) at 900–1100° C. The initial phase identification …
exposure times (6, 12, 24, and 48 h) at 900–1100° C. The initial phase identification …
High-temperature oxidation performance of Inconel 625 superalloy fabricated by wire arc additive manufacturing
High-temperature oxidation behavior of Inconel 625 superalloy manufactured by wire arc
additive manufacturing (WAAM) technique was investigated. Results showed that …
additive manufacturing (WAAM) technique was investigated. Results showed that …
Effect of pressure on high-temperature oxidation of Ni alloys in supercritical CO2 containing impurities
RP Oleksak, CS Carney, ÖN Doğan - Corrosion Science, 2023 - Elsevier
Abstract Direct supercritical CO 2 (sCO 2) power cycles require structural materials
compatible with hot sCO 2 containing high levels of water and oxygen impurities. Chromia …
compatible with hot sCO 2 containing high levels of water and oxygen impurities. Chromia …
Early stages of liquid-metal corrosion on pre-oxidized surfaces of austenitic stainless steel 316L exposed to static Pb-Bi eutectic at 400° C
The effect of pre-oxidation in air at 300–500° C on the initiation and development of liquid
metal corrosion attack on 316L austenitic steel in static lead-bismuth eutectic (LBE) with∼ …
metal corrosion attack on 316L austenitic steel in static lead-bismuth eutectic (LBE) with∼ …
[HTML][HTML] Performance and evolution of cold spray Cr-coated optimized ZIRLO™ claddings under simulated loss-of-coolant accident conditions
A Fazi, M Sattari, K Stiller, HO Andrén… - Journal of Nuclear …, 2023 - Elsevier
The performance of Cr-coated Optimized ZIRLO™ as accident tolerant fuel cladding material
for pressurized water reactors (PWRs) is assessed. The coating oxidation mechanisms …
for pressurized water reactors (PWRs) is assessed. The coating oxidation mechanisms …
[PDF][PDF] Materials performance in CO2 and supercritical CO2
RP Oleksak, F Rouillard - Comprehensive Nuclear Materials, 2020 - researchgate.net
Past and current gas-cooled nuclear reactors rely on CO2-rich gases as a coolant to transfer
heat from the reactor core, while future reactors may utilize supercritical CO2 Brayton cycle …
heat from the reactor core, while future reactors may utilize supercritical CO2 Brayton cycle …
On the role of surface deformation in the oxidation of NiCr alloys at 340–600 C
The effect of surface deformation on selective oxidation is studied on a Ni-30Cr alloy
prepared by grinding (SiC paper) vs. polishing (diamond suspensions), and oxidized in air …
prepared by grinding (SiC paper) vs. polishing (diamond suspensions), and oxidized in air …
Revealing the long-term oxidation and carburization mechanism of 310S SS and Alloy 800H exposed to supercritical carbon dioxide
X Guo, Z Liu, L Li, J Cheng, H Su, L Zhang - Materials Characterization, 2022 - Elsevier
The oxidation/carburization behavior and failure mechanism of 310S stainless steel (SS)
and Alloy 800H exposed to supercritical carbon dioxide at 650° C/20 MPa were …
and Alloy 800H exposed to supercritical carbon dioxide at 650° C/20 MPa were …
High temperature oxidation of Ni alloys in CO2 containing impurities
Next-generation power systems require structural alloys resistant to high-temperature
oxidation in CO 2 containing combustion impurities. Here we evaluate the oxidation …
oxidation in CO 2 containing combustion impurities. Here we evaluate the oxidation …
Suppressing void formation in all-solid-state batteries: the role of interfacial adhesion on alkali metal vacancy transport
ID Seymour, A Aguadero - Journal of Materials Chemistry A, 2021 - pubs.rsc.org
All-solid-state batteries containing a solid electrolyte and a lithium (Li) or sodium (Na) metal
anode are a promising solution to simultaneously increase the energy density and safety of …
anode are a promising solution to simultaneously increase the energy density and safety of …