Spray deposited nanostructured CuO thin films: influence of substrate temperature and annealing process
H Zare Asl, S Mohammad Rozati - Materials Research, 2018 - SciELO Brasil
In this study, CuO thin films were deposited on glass substrates at a wide range of
temperatures from 450ºC to 550ºC with steps of 25ºC by chemical spray pyrolysis technique …
temperatures from 450ºC to 550ºC with steps of 25ºC by chemical spray pyrolysis technique …
Composition Effects on Ultrafast Optical Properties of CuxOy Thin Films: A Transient Absorption Study
Cu2O, CuO, and mixed-phase Cu2O/CuO thin films with different relative compositions were
prepared by oxidizing Cu films at temperatures 150–380° C for a time period ranging from 2 …
prepared by oxidizing Cu films at temperatures 150–380° C for a time period ranging from 2 …
Electrodeposited p-type Cu2O thin films at high pH for all-oxide solar cells with improved performance
Y Yang, M Pritzker, Y Li - Thin Solid Films, 2019 - Elsevier
We report the electrodeposition of cuprous oxide (Cu 2 O) films from cupric sulfate-lactate
electrolytes at high pH 13.5 and their performance in all-oxide fluorine-doped tin oxide/Cu 2 …
electrolytes at high pH 13.5 and their performance in all-oxide fluorine-doped tin oxide/Cu 2 …
Effects of HCl and methanol in the precursor on physical properties of spray-deposited nanostructured CuO thin films for solar applications
The influence of the presence of HCl and methanol in the precursor on CuO absorber layers
deposited by spray pyrolysis has been investigated. The films were deposited on glass …
deposited by spray pyrolysis has been investigated. The films were deposited on glass …
Density of states measurements in a-Si: H and a-Si: H/nc-Si: H multilayer structures prepared by hot wire chemical vapor deposition
A Yadav, P Agarwal - Materials Science in Semiconductor Processing, 2017 - Elsevier
In this study, the density of states (DOS) were determined in single layer hydrogenated
amorphous silicon (a-Si: H) and a-Si: H/nc-Si: H (hydrogenated nanocrystalline silicon) …
amorphous silicon (a-Si: H) and a-Si: H/nc-Si: H (hydrogenated nanocrystalline silicon) …
Electrodeposition of p-Type Cuprous Oxide and its Application in Oxide Solar Cells
Y Yang - 2017 - uwspace.uwaterloo.ca
Cuprous oxide (Cu2O) is a promising material for the fabrication of oxide solar cells due to
its abundance, nontoxicity, stability and ability to be deposited under mild conditions. At the …
its abundance, nontoxicity, stability and ability to be deposited under mild conditions. At the …