The current study examined a comprehensive review of the literature on functionally graded
composites, particularly Al-Mg2Si in situ metal matrix composites. Functionally graded Al-Si …

An as-cast aluminum-matrix composite (AMC) with in-situ formed Mg 2 Si phase was
subjected to high-temperature annealing, hot rolling, and hot extrusion processes. The …

Functionally graded in-situ A356-Mg 2 Si composites by centrifugal casting method have
been studied with varying percentage of extra Mg additions during synthesis. The coarse …

The effect of incremented 3Be-Sb (Be and Sb fixed-ratio at 3) complex modifier on the
microstructure and mechanical properties of hypereutectic Al-Si-Mg alloy was investigated …

This work investigated the microstructure evolution, tensile, impact, hardness, and sliding
wear properties of an Al–20Mg 2 Si–2Cu in situ composite treated with different Bi contents …

From the viewpoints of particle refinement and homogeneous distributions of reinforcing
phase, this work proposed a novel method to prepare Al/Mg 2 Si composites. Mg 2 Si …

After solution treatment at 520° C for 6 h and subsequent aging at 200° C for 6 h, eutectic Mg
2 Si phase in Al–10% Mg 2 Si alloy transforms from long rod to short fiber-like and spherical …

The microstructure and corrosion behavior of Al–10% Mg 2 Si alloy after heat treatment are
investigated. For Al–10% Mg 2 Si in 3.5 wt.% NaCl solution, corrosion of α-Al phase initiates …

Corrosion resistance is an important fact to be considered in practical engineering
application of Al–Mg 2 Si alloys, besides the mechanical properties. So in the paper …

In the present work, the effect of beryllium (Be) addition (0, 0.3, 0.6, 1.0, 1.5 and 2.0 wt%) on
the microstructure and mechanical properties of the 15% Mg 2 Si/Al-8Si composite has been …