Abstract The Si–NbSi 2 composite coating with a smooth surface was successfully prepared
on Nb substrate by hot dip silicon-plating (HDS) technology. The composite coating is …

Nb-Si-based superalloys are considered as the most promising high-temperature structural
material to replace the Ni-based superalloys. Unfortunately, the poor oxidation resistance is …

A Si-rich NbSi 2 coating was prepared on Nb substrate by hot dip silicon plating process,
which mainly consists of Nb 5 Si 3 interfacial layer, NbSi 2 intermediate layer and silicon-rich …

The oxidation behavior of TiNbMo 0.5 Al 0.225 Si x (x= 0.1, 0.25, 0.4, 0.55) refractory high
entropy alloys in air at 1000℃ was investigated. These novel alloys have a BCCss/(Nb, Ti) 5 …

The oxidation behaviour of an advanced Ti2AlNb alloy was investigated over a temperature
range of 650–800° C in lab air for short-and long-term experiments. The mass gain …

The effect of Y 2 O 3 on the oxidation resistance of Nb-Ti-Si based alloys was investigated.
Acicular Y 2 O 3 is generated with Y content exceeding 0.3 at%. Oxidation tests reveal that …

Abstract Nb-18Si-24Ti-2Cr-2Al-2Hf (at.%) alloy was fabricated by selective laser melting
(SLM). Results showed that an ultra-fined microstructure was achieved by SLM. After …

Abstract The Nb-Si based alloys adding Mo, Zr and Mo-Zr respectively were prepared by
vacuum non-consumable arc melting. The alloys' microstructure and comprehensive …

Refractory metal based alloys show great potential as structural materials for high-
temperature applications due to their high melting points, but they are prone to catastrophic …

Abstract Al 2 O 3-modified Yb 2 SiO 5 was prepared as environmental barrier coating (EBC),
and the water vapor corrosion behavior at 1500° C was investigated. The residual phase, Yb …