A review on coatings through thermal spraying
Ceramic-coated metals with enhanced properties such as chemical and environmental
deterioration resistance and high thermal stability have previously found widespread uses in …
deterioration resistance and high thermal stability have previously found widespread uses in …
An overview on synthesis, processing and applications of nickel aluminides: From fundamentals to current prospects
S Sampath, VP Ravi, S Sundararajan - Crystals, 2023 - mdpi.com
Nickel aluminides have desirable properties for use in high-temperature applications. Nickel
aluminides have certain desirable qualities, but for almost a decade in the 1990s, those …
aluminides have certain desirable qualities, but for almost a decade in the 1990s, those …
Study of the hardfacing process using self-shielding flux-cored wire with an exothermic addition with a combined oxidizer of the Al-(CuO/Fe2O3) system
B Trembach, Y Silchenko, O Balenko… - … International Journal of …, 2024 - Springer
Abstract Analysis of publications has shown that the use of the exothermic addition with a
combined oxidizer (x CuO+(x-1) Fe2O3-Al) as components of filler materials will reduce …
combined oxidizer (x CuO+(x-1) Fe2O3-Al) as components of filler materials will reduce …
Corrosion and wear of coatings fabricated by HVOF-spraying of nanostructured and conventional WC–10Co-4Cr powders on Al7075-T6
AG Lekatou, D Sioulas, D Grimanelis - International Journal of Refractory …, 2023 - Elsevier
The present work compares WC-10Co-4Cr coatings fabricated by HVOF spraying of a
conventional powder (1.33±0.67 μm) and a nanostructured powder (0.17±0.06 μm) on …
conventional powder (1.33±0.67 μm) and a nanostructured powder (0.17±0.06 μm) on …
Two-dimensional model of high-temperature synthesis of an intermetallic in the regime of dynamic thermal explosion
NV Bukrina, AG Knyazeva - High Temperature Material …, 2020 - dl.begellhouse.com
The paper suggests a two-dimensional model of high-temperature synthesis of an
intermetallic in the regime of dynamic thermal explosion after the heating of the powder …
intermetallic in the regime of dynamic thermal explosion after the heating of the powder …
Combustion of boron particles coated with an energetic polymer material
Elemental boron has attracted considerable attention as a potential high energetic material
for explosives and propellants. However, its use has been hindered by its high vaporization …
for explosives and propellants. However, its use has been hindered by its high vaporization …
Microstructural analysis and hot corrosion behavior of HVOF-sprayed Ni-22Cr-10Al-1Y and Ni-22Cr-10Al-1Y-SiC (N) coatings on ASTM-SA213-T22 steel
The present paper deals with the investigation of microstructure and high-temperature hot
corrosion behavior of high-velocity oxy fuel (HVOF)-produced coatings. Two powder coating …
corrosion behavior of high-velocity oxy fuel (HVOF)-produced coatings. Two powder coating …
Manufacturing of cast A356 matrix composite reinforced with nano-to micrometer-sized SiC particles
In this study, large micron-sized SiC particles were fragmented via ball-milling process in the
presence of iron and nickel powders, separately, to fabricate composite powders of Fe–SiC …
presence of iron and nickel powders, separately, to fabricate composite powders of Fe–SiC …
[HTML][HTML] A comparative study of thermal sprayed Al2O3-TiO2 coatings on PM AISI 316L
The widespread use of stainless steels (SS) in various applications is hindered by their
inadequate wear resistance, hardness and high density. Structural metallic components …
inadequate wear resistance, hardness and high density. Structural metallic components …
Mechanical, Tribological, and Electrochemical Evaluation of NiCrAlMoFe Thermally Sprayed Coatings Subject to Post-treatments
Herein, two Ni-based coatings, namely NiAlFeMo (P21) and NiAlFeCrMo (P31), were
deposited on E335 steel using the flame spraying technique. The coatings were subjected to …
deposited on E335 steel using the flame spraying technique. The coatings were subjected to …