There is a tremendous increase in the demand for converting biomaterials into high-quality
industrially manufactured human body parts, also known as medical implants. Drug delivery …

Magnesium (Mg)-based biocomposites and bioalloys are used in biomedical applications
such as bone fixation, cardiovascular stents, hip joints, screws/pins, and dental implants …

The objective of the research was to improve the wear resistance of titanium alloys by ball
burnishing process. Burnishing process parameters such as burnishing speed, burnishing …

Metals are extensively used in a variety of applications in the medical field for internal
support and biological tissue replacements, such as joint replacements, dental roots …

The deleterious innate attribute of Ti6Al4V, the workhorse material among the alloy series of
titanium is its incompetent tribo-behavior. Infinite surface modification techniques, viz., the …

In this study, friction performance, surface textures, and wear mechanisms of Titanium Grade
(Gr) 2 material were investigated with a pin-on-disc tester. The study was carried out under …

Being easily fabricated, welded, biocompatible, having a high strength-to-weight ratio,
withstanding comparatively high temperatures up to 800° C and low modulus of elasticity …

Wear and corrosion behaviour of cold-rolled Ti–13Nb–13Zr alloy, with martensitic
microstructure, and Ti–6Al–4V ELI alloy, in martensitic and two-phase (α+ β) microstructural …

Biomaterials are the most emerging and promising field in total joint arthroplasty (TJA) as
these materials gain their popularity in the ageing population. With steep growth in …

Dry sliding wear tests were performed for Ti–6Al–4V alloy under a load of 50–250N at 25–
500° C on a pin-on-disk elevated temperature tester. Worn surfaces and subsurfaces were …