Recent research and development status of laser cladding: A review
In industries such as aerospace, petrochemistry and automobile, many parts of different
machines are under environment which shows high temperature and high pressure, and …
machines are under environment which shows high temperature and high pressure, and …
The effect of process parameters and characterization for the laser cladding of cBN based composite clad over the Ti6Al4V alloy
In the present study, a metal matrix composite of nitride, boride, and oxide layer over the
Ti6Al4V substrate has been formed by using high-quality reinforcement like cBN, TiO 2, and …
Ti6Al4V substrate has been formed by using high-quality reinforcement like cBN, TiO 2, and …
Strengthening mechanism in two-phase FeCoCrNiMnAl high entropy alloy coating
Y Cui, J Shen, SM Manladan, K Geng, S Hu - Applied Surface Science, 2020 - Elsevier
The two-phase FeCoCrNiMnAl high entropy alloy cladding layer was produced by laser
cladding method, and its strengthening mechanism was studied. Using XRD, EDS, TEM and …
cladding method, and its strengthening mechanism was studied. Using XRD, EDS, TEM and …
Abrasive wear performance of laser cladded Inconel 625 based metal matrix composites: Effect of the vanadium carbide reinforcement phase content
C Raahgini, D Verdi - Surface and Coatings Technology, 2022 - Elsevier
In the present work, laser cladding of vanadium carbide (VC)-reinforced Inconel 625 (In625)
metal matrix composite (MMC) coating was carried out on grade 304 stainless steel …
metal matrix composite (MMC) coating was carried out on grade 304 stainless steel …
[HTML][HTML] Direct laser metal deposition cladding of IN718 on DIN 1.2714 tool steel reinforced by the SiC nanoparticles
MR Hajideh, M Farahani - Journal of Materials Research and Technology, 2023 - Elsevier
Due to ever-present applied pressure and thermal shocks, forged dies are in danger of
durability and hardness reduction, surface cracks formation, and failure. Therefore, this study …
durability and hardness reduction, surface cracks formation, and failure. Therefore, this study …
Effect of high temperature heat treatment on microstructure and properties of FeCoCrNiAl high-entropy alloy laser cladding layer
Y Cai, M Shan, SM Manladan, L Zhu, F Gao… - Materials …, 2022 - Elsevier
Here, the heat treatment for FeCoCrNiAl high-entropy alloy (HEA) laser cladding (LC) layer
was given at a temperature which is higher than that of the first phase transition. The effects …
was given at a temperature which is higher than that of the first phase transition. The effects …
Strengthening mechanisms in multi-phase FeCoCrNiAl1. 0 high-entropy alloy cladding layer
Y Cai, L Zhu, Y Cui, K Geng, SM Manladan… - Materials …, 2020 - Elsevier
In order to study the strengthening mechanisms in the multi-phase (FCC+ BCC) high-
entropy alloy cladding layer, FeCoCrNiAl 1.0 coating was fabricated by laser cladding …
entropy alloy cladding layer, FeCoCrNiAl 1.0 coating was fabricated by laser cladding …
[HTML][HTML] Research on the high temperature oxidation mechanism of Cr3C2–NiCrCoMo coating for surface remanufacturing
J Du, F Li, X Ran, X Zhang, X Qi - Journal of Materials Research and …, 2021 - Elsevier
To improve the high-temperature oxidation performance of remanufactured coatings, a novel
Cr 3 C 2–NiCrCoMo (NCC) coating with modified multielement alloy adhesive phase was …
Cr 3 C 2–NiCrCoMo (NCC) coating with modified multielement alloy adhesive phase was …
Microstructure and properties of WC-12Co composite coatings prepared by laser cladding
HU Miao, J Tang, X Chen, YE Nan, X Zhao… - … of Nonferrous Metals …, 2020 - Elsevier
A comprehensive study of the phase composition, microstructure evolution, microhardness
and wear performance of WC-12Co composite coatings fabricated by laser cladding using …
and wear performance of WC-12Co composite coatings fabricated by laser cladding using …
Performance and efficiency control method of in-situ TiC generated by laser cladding
G Lian, J Zeng, C Chen, X Huang - Optik, 2022 - Elsevier
The work studied the effects of differences in the molar ratios of carbon to titanium on the
performance and forming efficiency of in-situ TiC materials generated by laser cladding. The …
performance and forming efficiency of in-situ TiC materials generated by laser cladding. The …